|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
September 4th, 2009, 22:10
|
#16 |
|
asexual lumbricus terrestris
|
Best? prometheus.
Most convenient is modify modular. |
|
|
|
September 4th, 2009, 23:04
|
#17 |
|
aka Halo64
|
Well, I got some Action gear and Piston so that should do as this gun will not be gamed much.
|
|
|
|
|
September 5th, 2009, 13:07
|
#18 |
|
aka Halo64
|
One more thing, I had to cut the buffer tube off to get the Striped screw out, Will a DBoys buffer tube fit the G&G or will it need a Different one.
Thanks |
|
|
|
|
September 7th, 2009, 22:38
|
#19 |
|
aka Halo64
|
I hate to bump this again but I need to know if the DBoys Buffer tube will work with the G&G.
Thanks |
|
|
|
|
September 9th, 2009, 02:12
|
#20 |
|
i need help getting the dust cover off, wanna swap it for another.. i am completely new to opening up guns.. so if someone could assist me step by step.. ive seen enough vids on youtube to know how to take most of it apart but yeah the dust cover never seems to get mentioned.. i own a G&G m4 blowback..
appreciate anyones time and help |
|
|
|
|
September 9th, 2009, 18:42
|
#21 |
|
aka Halo64
|
I have not taken the Dust cover off mine, Like I said earlier I don't gamer this gun I have an ass load of gun to game, I just want this one to work for a loaner gun, All I need is a new stock tube now.
|
|
|
|
|
September 9th, 2009, 18:55
|
#22 |
|
Tys
|
The dust cover is just a regular dust cover. There's a little e-clip that snaps onto the dust cover rod. Take that clip off and then you might be able to wiggle the rod out. If you can't (because the forward assist knob is blocking it too much)...you're supposed to take the front end off (or at least the fore-grips and delta ring) and slip it out forward. You might have to take the front sight and gas tube out as well to get the Delta ring off...can't remember.
If I recall correctly, go easy on the plastic nub on the dust cover that catches the top inside of the ejection port. It's overly long and can snap off. Best of luck, Tys |
|
|
|
|
September 11th, 2009, 00:58
|
#23 | |
|
If you have a removable handguard (M4A1 or RIS), just remove the two halves, then press in the delta ring and turn it until it can be removed (notches aligned). Might not work for some rings that are "spiky" (like the RS ones). In that case you have to unscrew the spiky part.
Just pull on the hinge pin after that had the cover will go out.
__________________
Quote:
|
|
|
|
|
|
September 27th, 2009, 01:58
|
#24 |
|
aka Halo64
|
Alright so after getting it fixed it wont feed in full auto, but feeds fine in semi.
|
|
|
|
|
September 27th, 2009, 02:09
|
#25 | |
|
Suburban Gun Runner
|
Yes a dboys buffer will fit on a G&G.
__________________
Quote:
|
|
|
|
|
|
September 27th, 2009, 04:00
|
#26 |
|
Turn the gun upside down and see if gravity feeds it alright.
__________________
Con Murder Dark Rhino L.A. Airsoft |
|
|
|
|
September 27th, 2009, 11:54
|
#27 |
|
aka Halo64
|
No it still will not feed in full auto even upside down, but semi works 100%
|
|
|
|
|
September 28th, 2009, 20:51
|
#28 |
|
|
ANYONE KNOW WHERE TO GET REPLACEMENT G&G BODY PARTS?? SUCH AS DUST COVER ughh i cant find the exact one i need.. and any TM replacement, the lip that clips into the ejection port isnt long enough
|
|
|
|
|
September 29th, 2009, 20:05
|
#29 | ||
|
|
Quote:
G&G ARs have the spring installed the OTHER way around. To keep the door closed, just like on real rifles. There is just no pin/clip/notch on the stock one.
__________________
Quote:
|
||
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
