Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Tactics, Techniques and Procedures
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Maps

:

Tactics, Techniques and Procedures

Reply
 
Thread Tools
Old December 27th, 2009, 16:37   #1
youonlywish
 
youonlywish's Avatar
 
Join Date: Mar 2006
Location: Brantford, ON.
Maps

Just to get a new topic going here...

I've been to a few fields with a variety of different maps.

At one, a hand drawn, roughly to scale image of the surrounding area...

At another, a blown up satellite photo from Google.

Is there any place to reliably get topographical or satellite maps of populated areas?

The field I typically play at is in Niagara-area... I'm getting close to drawing out a map.
__________________
The Devil's Bench - Gaming Cafe, Brantford, ON.
youonlywish is offline   Reply With Quote
Old December 27th, 2009, 17:43   #2
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
http://www.nrcan-rncan.gc.ca/com/index-fra.php

Canada topographic maps.
I use it all the time.
Not 100% reliable, but still the best, free, starting point to map an erea.

I bough up to date topographic maps of where I usually play or trek, and the online maps are close enough. They just lack important data, such as magnetic declinaison.

I learned how to use a topographic map and compas. Now, with a protractor, I can pinpoint spots with UTM scales, wich are GPS compatible points. If enough people are using this method in large games, I predect a HUGE improvement on milsim management.

My next large milsim will have this implemented.
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
Old December 27th, 2009, 20:45   #3
Yannos
likes touching tralalas
 
Yannos's Avatar
 
Join Date: Feb 2008
Location: Je me souviens
There the english version http://www.nrcan-rncan.gc.ca/com/index-eng.php

Thanks for this link fox_111, but I am quite lost right now, where do you find the topo maps?
__________________
EF-02 SEMPER FI

Last edited by Yannos; December 27th, 2009 at 20:50..
Yannos is offline   Reply With Quote
Old December 28th, 2009, 18:38   #4
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
Here

http://atlas.nrcan.gc.ca/site/english/maps/topo/map

It was simple a following the links to toporama.
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
Old January 5th, 2010, 19:02   #5
Oborous
 
Oborous's Avatar
 
Join Date: May 2008
Location: Edmonton, AB
Anyone know a place where you can get maps printed on tyvek for a decent price?

Oborous
Oborous is offline   Reply With Quote
Old January 5th, 2010, 19:59   #6
Indianajohns
Herr ScheißeLiebhaber
 
Indianajohns's Avatar
 
Join Date: Oct 2009
Location: Sylvan Lake, Alberta
Try mapsherpa.com?
Indianajohns is offline   Reply With Quote
Old January 5th, 2010, 20:10   #7
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
Quote:
Originally Posted by Oborous View Post
Anyone know a place where you can get maps printed on tyvek for a decent price?

Oborous
Why on Tyvek?
You can have your map printed and then plastified. Cost about 20-30$ depending on the map.

A typical topographic map cost 15$.
Check your yellowpage book or whatever it's called to find your local map dealer. Online maps are often more expensive, because they are not a map dealer, juste a retailler.
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
Old January 5th, 2010, 23:01   #8
WhiskeySix
 
WhiskeySix's Avatar
 
Join Date: Dec 2008
Location: St. Catharines, Ontario
If you want topo maps of the Niagara area, go to Peninsula Press on Bunting Rd in St Catharines. They did have tons of topos and waterways charts as well (been a couple years since I was in there). The prices weren't too bad, I think less than $10 a sheet.
WhiskeySix is offline   Reply With Quote
Old January 6th, 2010, 01:52   #9
lt_poncho
 
lt_poncho's Avatar
 
Join Date: Sep 2002
Location: GTA
Send a message via MSN to lt_poncho
Staples.

That was easy.
__________________
86 Tactics Change.
lt_poncho is offline   Reply With Quote
Old January 6th, 2010, 12:19   #10
Oborous
 
Oborous's Avatar
 
Join Date: May 2008
Location: Edmonton, AB
Quote:
Originally Posted by FOX_111 View Post
Why on Tyvek?
You can have your map printed and then plastified. Cost about 20-30$ depending on the map.

A typical topographic map cost 15$.
Check your yellowpage book or whatever it's called to find your local map dealer. Online maps are often more expensive, because they are not a map dealer, juste a retailler.
Just so we're on the same page, by plastified you mean laminated? i.e. laminated between two sheets of plastic?

Tyvek is extremely durable -and- flexible, it folds down really well and if you're in a hurry, just stuff the map into a pocket. I saw a post on... hmm, maybe gear scout which reminded me of SERE maps that I've seen (not to say all SERE maps) have been printed on tyvek.

I think Rite in the Rain paper is a tyvek derivative, and may just end up doing an 11"x17" printed map that way.

Oborous
Oborous is offline   Reply With Quote
Old January 6th, 2010, 14:08   #11
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
Ok I now know what you mean.
Some money notes are made like this. (Australia if I remember right)

Never seen maps like this, but I'd like my maps on Tyvek now hehe.
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
Old January 7th, 2010, 14:18   #12
Oborous
 
Oborous's Avatar
 
Join Date: May 2008
Location: Edmonton, AB
Here is an example of a Tyvek map that shows how foldable/scrunchable it is.
Oborous is offline   Reply With Quote
Old January 12th, 2010, 11:02   #13
DrDoUm
 
DrDoUm's Avatar
 
Join Date: Feb 2007
Printing on Tyvek

If I had to print a map on a special material, I would try to find a local printing office that has a flatbed digital printer... these things can print on almost any kind of material such as fabric, plastic sheets or metal plates, as long as its flat and thin.
DrDoUm is offline   Reply With Quote
Old January 12th, 2010, 13:51   #14
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
I think that a regular map in a plastic carrying case is enough for most people. All those special custom project could make your map cost as much as 50$ and up for something that is either free or bellow 20$.
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
Old January 12th, 2010, 15:08   #15
DrDoUm
 
DrDoUm's Avatar
 
Join Date: Feb 2007
Quote:
Originally Posted by FOX_111 View Post
I think that a regular map in a plastic carrying case is enough for most people. All those special custom project could make your map cost as much as 50$ and up for something that is either free or bellow 20$.
I agree. Personally, I would go for a regular map... I'm just saying that's a possibility.
DrDoUm is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Tactics, Techniques and Procedures

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 06:50.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.