LCT ak 47 wood kit

Sim123456 · April 28th, 2009, 11:49

Hi guys, I received my LCT Ak 47 wood kit with my G&P Ak 47 body set. I installed them all on my CYMA AKM. Since I never found wood kit for the CYMA AKM model, and since in Canada you can't really choose what model you want (I would have bought a CM048, not a CM036) I had to switch the body to fit a wood kit on it.

The LCT AK 47 cost 105us on WGCshop. The color is very nice, it smeel good and is nice to the touch but it is a real pain in the as* to fit. Everything almost fit directly but in the same times, nothing fit completly. I had to sand almost every edges of every parts. The stock fit directly but is off on the upper part when it's connecting to the receiver. It does not wooble at all, it hold firm. My AKM screws aren't good for the G&P receiver, the head is popping out and they don't hold well. The but stock close with screws. The inside of the stock is 99.5% too small for my stock 8.4v battery. I had to remove the cable with the fuse and forced everything it. Almost not fit.

The grip hold well but require a bit of sanding. The G&P steel magazine catch also require material removal to fit. The down part of the handgard require some sanding since the piece of wood that connect to the front end hole is too large. The upper handguard require sanding too.

The result is good, solide since there is absolutly no play anywhere with right sanding. I wish the stock would fit better. Any advices welcome

YouTube - CYMA Ak-47 with LCT wood kit and G&P body set

Forever_kaos · April 28th, 2009, 12:04

Looks pretty sharp.
If you think modding any wood is a bitch, try real AK wood, now that's a pain!

.

Congrats on the wood mod job, looks nice and clean to boot.

Sim123456 · April 28th, 2009, 14:04

Thank you. I though that since it was a new wood kit on the market, tolerance would be better ^^

I'm not good enough to work the wood of a real AK. This is far beyond my capacities lol

Adamlxlx · February 28th, 2010, 10:41

I just picked up one of these kits and am also having trouble fitting it to my CA ak47. The screws for the stock don't seem long enough to get good thread. What screws did you use?

Adamlxlx · February 28th, 2010, 12:34

Wow these kits are SHIT!!! Cheap china driftwood for $100 wow I feel so ripped off! EVERYTHING in this kit requires mods. Wow so cheap!

Sneakernuts · February 28th, 2010, 12:37

Quote:

Originally Posted by Adamlxlx

Wow these kits are SHIT!!! Cheap china driftwood for $100 wow I feel so ripped off! EVERYTHING in this kit requires mods. Wow so cheap!

FYI these wood kits are made in Taiwan

Adamlxlx · February 28th, 2010, 12:39

FYI no they are not. Says right on the back....product of CHINA!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 28th, 2009, 11:49	#1
Sim123456 Trader rating Join Date: Oct 2008 Location: Laval	LCT ak 47 wood kit Hi guys, I received my LCT Ak 47 wood kit with my G&P Ak 47 body set. I installed them all on my CYMA AKM. Since I never found wood kit for the CYMA AKM model, and since in Canada you can't really choose what model you want (I would have bought a CM048, not a CM036) I had to switch the body to fit a wood kit on it. The LCT AK 47 cost 105us on WGCshop. The color is very nice, it smeel good and is nice to the touch but it is a real pain in the as* to fit. Everything almost fit directly but in the same times, nothing fit completly. I had to sand almost every edges of every parts. The stock fit directly but is off on the upper part when it's connecting to the receiver. It does not wooble at all, it hold firm. My AKM screws aren't good for the G&P receiver, the head is popping out and they don't hold well. The but stock close with screws. The inside of the stock is 99.5% too small for my stock 8.4v battery. I had to remove the cable with the fuse and forced everything it. Almost not fit. The grip hold well but require a bit of sanding. The G&P steel magazine catch also require material removal to fit. The down part of the handgard require some sanding since the piece of wood that connect to the front end hole is too large. The upper handguard require sanding too. The result is good, solide since there is absolutly no play anywhere with right sanding. I wish the stock would fit better. Any advices welcome YouTube - CYMA Ak-47 with LCT wood kit and G&P body set Last edited by Sim123456; May 2nd, 2009 at 12:15..

April 28th, 2009, 12:04	#2
Forever_kaos Trader rating Join Date: Oct 2006 Location: Mississauga.	Looks pretty sharp. If you think modding any wood is a bitch, try real AK wood, now that's a pain! . Congrats on the wood mod job, looks nice and clean to boot. __________________ Johann Hansen. 1./SS-Pz-Gren. Rgt. 20. 9th SS Hohenstaufen. Ontario's Largest WW2 re-enactment. OP Woodsman. Join us!

April 28th, 2009, 14:04	#3
Sim123456 Trader rating Join Date: Oct 2008 Location: Laval	Thank you. I though that since it was a new wood kit on the market, tolerance would be better ^^ I'm not good enough to work the wood of a real AK. This is far beyond my capacities lol

LCT ak 47 wood kit

Upgrades & Modifications