hop-up or bb problem...

[malouin01]

hi, I recently change my CA m15a2 carabine for a C7a2. I buy G&P blackwater body and a madbull 6.03 tightbore. I correctly assemble the gun and the hop-up like in this site http://www.airsoftretreat.com/review...uct=118&cat=49. but when y shot, the hop-up don't "upping" the bb or simply jam. I know that I have some shit bb ( flying color) but is that because the hop-up don't function...

p.s. sorry for my english

[Greylocks]

Ca peux etre: Les BB. Le hopup mal ajuste/monte. Ou le tightbore qui est beaucoup trop serre.

Avec un 6.03, tu ne peux pas te servir de BB qui sont de la merde. Montre le a un expert local. Et complete ton profil d'usager, sinon les experts locaux ne pourrons pas t'aider s'ils ne peuvent te trouver.

[malouin01]

ok merci... tu connai tu des tech proche de st-hyacinthe

[Greylocks]

Non, regarde la liste deja ecrite ou demande dans la section Teams. C'est pas loin de Montreal donc il devrais avoir plusieurs personnes dans ton coin.

Prends le temps de lire et tu trouveras tout ce dont tu a besoin. Ok? Personne ici n'aime repeter ce qui est deja ecrit. Je vais meme te donner le lien:http://www.airsoftcanada.com/showthread.php?t=508

[ThunderCactus]

Flying color .25s are NOT crap, I use them in all my 6.03 tightbores with 10% less performance than KSC perfects.

[Amos]

Originally Posted by ThunderCactus

Flying color .25s are NOT crap, I use them in all my 6.03 tightbores with 10% less performance than KSC perfects.

They do not work AT all in my 6.03 Prometheus M14 barrel.

The downfall of my gun was the flying color BB's... not anything internal.

[ThunderCactus]

As I recall you couldnt get ANY BBs to work in your M14 lol

[Greylocks]

I did not say it was the BB's (or that brand was crappy) since I dont know it. I said the BBs could be the reason. In this case I think it's most likely the tightbore that is too tight and the hopup that needs attention.

I should not have to write in french, and then have to translate all the time, in order to explain the grammar or nuances.

[malouin01]

ok thanks I will check with some other BB'S

[Amos]

Originally Posted by ThunderCactus

As I recall you couldnt get ANY BBs to work in your M14 lol

KSC perfects work just fine

[testtube]

If you know anyone who can look @ it get them to, There is people in your area that can help you do some research also you may want to use Bastards.

[CDN_Stalker]

Originally Posted by testtube

If you know anyone who can look @ it get them to, There is people in your area that can help you do some research also you may want to use Bastards.

Gee, there's a plug if I ever heard one.

[HaZarD SFD]

I have use the flying color ones at wasaga on my G36C with a 6.03 tightbore and they did jam.
What brand hopup rubber do you have?
Did you put a drop of silicone oil in it?
Did you unwind the hopup and fire it that way?

[malouin01]

Originally Posted by HaZarD SFD

I have use the flying color ones at wasaga on my G36C with a 6.03 tightbore and they did jam.
What brand hopup rubber do you have?
Did you put a drop of silicone oil in it?
Did you unwind the hopup and fire it that way?

I have the G&P stock hop-up because the CA didn fit in... I have put silicone but it's in spray... and yes i have test wit or without hopup