Angry gun AEG inner barrel and Lonex M4 Hop up?

_Whiskey_ · May 9th, 2014, 18:26

Ok looking at upgrading my hop up unit in my VFC Mk18 now one thing I'm not too sure of is which unit to have installed to replace the stock VFC one? I tired MODIFY but that was shit so now looking at lonex m4 hop up with one of the 50 degree Lonex buckings (gun is being used for cqb) does anyone have any recommedations on what would work best with a angry gun inner barrel?

Cheers

airsoftmaniacman · May 9th, 2014, 18:29

I currently use a Lonex hop-up unit paired with a PDI inner barrel inside my VFC MK18. I highly recommend it.

I use a Lonex 70 degree bucking, but since it is only used for air seal (R-hop) I cannot comment on its performance.

_Whiskey_ · May 9th, 2014, 18:30

ok right on. but the unit with that bucking has a good airseal? thats the one thing with that modfiy bucking that !@&$)@ed me off

airsoftmaniacman · May 9th, 2014, 18:37

Yes. The Lonex bucking works excellently with the Lonex hop-up unit. I'm using this paired with a stock VFC gearbox, and the airseal is good though not perfect.

_Whiskey_ · May 9th, 2014, 18:40

Right on. Was looking at doing a Angry gun 285mm 6.03 tight bore barrel, Lonex M4 metal hop and 50 degree bucking, Should HOPEFULLY work out perfect for cqb I have the most shit luck with aftermarket parts LOL

Chromey · May 9th, 2014, 18:49

Im using a Modify Accurate Metal Hop, With Lonex 70D and a Prom 509 Barrel.

VERY VERY good set-up.

BUT the hop-up is Very touchy .

_Whiskey_ · May 9th, 2014, 19:38

I See. The thing that i'm worried about is the hop up and barrel fitting together. The modify hop and angry gun barrel just didn't fit together well (very loose, and no DIY worked at all tired everything) at all so I'm hoping that the lonex and angry gun barrel will fit together nicely and not too loose

_Whiskey_ · May 9th, 2014, 20:05

anyone have experience with the Angry gun barrels AEG OR GBB out there?

Chromey · May 9th, 2014, 20:51

I take it that you already bought the barrel, This is why your trying different hop-ups?

Have you tried t-tape?

_Whiskey_ · May 9th, 2014, 21:00

I have a extended barrel by angry gun, However looking at getting a cqb length one and putting a lonex hop up on that

SF_Chewy · May 9th, 2014, 21:07

I'm using PDI W Hold with these and they work great!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 9th, 2014, 18:26	#1
_Whiskey_ Trader rating Join Date: Jun 2013 Location: Cambridge	Angry gun AEG inner barrel and Lonex M4 Hop up? Ok looking at upgrading my hop up unit in my VFC Mk18 now one thing I'm not too sure of is which unit to have installed to replace the stock VFC one? I tired MODIFY but that was shit so now looking at lonex m4 hop up with one of the 50 degree Lonex buckings (gun is being used for cqb) does anyone have any recommedations on what would work best with a angry gun inner barrel? Cheers

May 9th, 2014, 18:49	#6
Chromey Whiny Attention Whore Trader rating Join Date: Jul 2013 Location: Acton, On	Im using a Modify Accurate Metal Hop, With Lonex 70D and a Prom 509 Barrel. VERY VERY good set-up. BUT the hop-up is Very touchy . __________________ B.A. Level 3 Cert.

May 9th, 2014, 20:51	#9
Chromey Whiny Attention Whore Trader rating Join Date: Jul 2013 Location: Acton, On	I take it that you already bought the barrel, This is why your trying different hop-ups? Have you tried t-tape? __________________ B.A. Level 3 Cert.

May 9th, 2014, 18:29	#2
airsoftmaniacman Trader rating Join Date: Mar 2014	I currently use a Lonex hop-up unit paired with a PDI inner barrel inside my VFC MK18. I highly recommend it. I use a Lonex 70 degree bucking, but since it is only used for air seal (R-hop) I cannot comment on its performance.

May 9th, 2014, 18:30	#3
_Whiskey_ Trader rating Join Date: Jun 2013 Location: Cambridge	ok right on. but the unit with that bucking has a good airseal? thats the one thing with that modfiy bucking that !@&$)@ed me off

May 9th, 2014, 18:37	#4
airsoftmaniacman Trader rating Join Date: Mar 2014	Yes. The Lonex bucking works excellently with the Lonex hop-up unit. I'm using this paired with a stock VFC gearbox, and the airseal is good though not perfect.

May 9th, 2014, 18:40	#5
_Whiskey_ Trader rating Join Date: Jun 2013 Location: Cambridge	Right on. Was looking at doing a Angry gun 285mm 6.03 tight bore barrel, Lonex M4 metal hop and 50 degree bucking, Should HOPEFULLY work out perfect for cqb I have the most shit luck with aftermarket parts LOL

May 9th, 2014, 19:38	#7
_Whiskey_ Trader rating Join Date: Jun 2013 Location: Cambridge	I See. The thing that i'm worried about is the hop up and barrel fitting together. The modify hop and angry gun barrel just didn't fit together well (very loose, and no DIY worked at all tired everything) at all so I'm hoping that the lonex and angry gun barrel will fit together nicely and not too loose

May 9th, 2014, 20:05	#8
_Whiskey_ Trader rating Join Date: Jun 2013 Location: Cambridge	anyone have experience with the Angry gun barrels AEG OR GBB out there?

May 9th, 2014, 21:00	#10
_Whiskey_ Trader rating Join Date: Jun 2013 Location: Cambridge	I have a extended barrel by angry gun, However looking at getting a cqb length one and putting a lonex hop up on that

May 9th, 2014, 21:07	#11
SF_Chewy Trader rating Join Date: Mar 2010	I'm using PDI W Hold with these and they work great!

Angry gun AEG inner barrel and Lonex M4 Hop up?

Upgrades & Modifications