Brass VSR cylinder kit ID?

Oz · October 15th, 2013, 00:49

Hey guys,

I recently picked up a broken VSR to work on as a side project. When picking it up the owner handed my a ziplock bag with a few spare parts including the original cylinder kit. After checking out the installed kit installed it seems to be made of decently high quality. The cylinder, nozzle and spring guide shaft are brass with a steel(?) piston and spring guide base.

It's been several years since I've tuned a VSR and was hoping somebody could give me an idea of what I'm looking at. I'll try and get some shots up in the next bit.

Cheers

ThunderCactus · October 15th, 2013, 01:06

marui stock parts are white nylon piston and spring guide, brass cylinder head and I assume steel or brass plated cylinder
Sears and spring guide locking pin would be grey pot metal
If it's a G-spec, the marui would also have an air brake on the piston

Oz · October 15th, 2013, 02:03

Sorry, maybe I didn't specify properly. There are two cylinder sets, the stock one and the upgraded mystery one. Also when I said the parts were brass I ment unplatted brass. As far as I can tell edgi is the only bare brass cylinder out there?

Oz · October 15th, 2013, 18:08

Photo up, any ideas?

damage · October 15th, 2013, 21:56

Looks like edgi to me.

Oz · October 16th, 2013, 03:58

Alright, after further investigation my mystery clone appears to be an AGM MP001 with an Edgi cylinder kit and barrel.

The edgi parts are great but I can't believe how terrible the AGM hop chamber is..

brently0725 · October 16th, 2013, 11:47

That pistons end looks like the Laylax one. Check to see if you have a Zero Trigger installed also. That would be decent.

Sent from my SGH-I747M using Tapatalk

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 15th, 2013, 00:49	#1
Oz Trader rating Join Date: Mar 2003 Location: Vancouver	Brass VSR cylinder kit ID? Hey guys, I recently picked up a broken VSR to work on as a side project. When picking it up the owner handed my a ziplock bag with a few spare parts including the original cylinder kit. After checking out the installed kit installed it seems to be made of decently high quality. The cylinder, nozzle and spring guide shaft are brass with a steel(?) piston and spring guide base. It's been several years since I've tuned a VSR and was hoping somebody could give me an idea of what I'm looking at. I'll try and get some shots up in the next bit. Cheers Last edited by Oz; October 15th, 2013 at 18:07..

October 15th, 2013, 21:56	#5
damage Trader rating Join Date: Jan 2005 Location: Port Coquitlam, BC	Looks like edgi to me. __________________ Team P.I.M.P. Vancouver BC -Guntech(PM or E-mail only)

October 16th, 2013, 11:47	#7
brently0725 Trader rating Join Date: Apr 2006 Location: Mission, BC	That pistons end looks like the Laylax one. Check to see if you have a Zero Trigger installed also. That would be decent. Sent from my SGH-I747M using Tapatalk __________________ -TM AK Beta Spetz -TM MP5 SD5 -TSD VSR10 -Ares G39C -A&K Tan Magpul Masad -We Tech M9 Tac Masterling -1Tornado Impacts V2/3 Gun Doc and BA experience

October 15th, 2013, 01:06	#2
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	marui stock parts are white nylon piston and spring guide, brass cylinder head and I assume steel or brass plated cylinder Sears and spring guide locking pin would be grey pot metal If it's a G-spec, the marui would also have an air brake on the piston

October 15th, 2013, 02:03	#3
Oz Trader rating Join Date: Mar 2003 Location: Vancouver	Sorry, maybe I didn't specify properly. There are two cylinder sets, the stock one and the upgraded mystery one. Also when I said the parts were brass I ment unplatted brass. As far as I can tell edgi is the only bare brass cylinder out there?

October 15th, 2013, 18:08	#4
Oz Trader rating Join Date: Mar 2003 Location: Vancouver	Photo up, any ideas?

October 16th, 2013, 03:58	#6
Oz Trader rating Join Date: Mar 2003 Location: Vancouver	Alright, after further investigation my mystery clone appears to be an AGM MP001 with an Edgi cylinder kit and barrel. The edgi parts are great but I can't believe how terrible the AGM hop chamber is..

Brass VSR cylinder kit ID?

Upgrades & Modifications