H&k mp5 A5

AnthB · June 20th, 2013, 19:11

We'll so far I've played with this gun stock so I wanted to do a couple minor things like a suppressor and a red dot. However, The orange tip cap (with the threading under it) will not come off . Whether it be with my torch , hot water or straight force I just cannot get it off. I also bought a sight rail (NcSTAR mp5/H&k scoupe mount) but honestly that clearly will not fit on this gun . I am having just a painful time upgrading the smallest and easiest things to do. Anyone have any sort of tips, info or even a video I can watch ?

It's so disheartening to be a Refrigeration mechanic for 8 , almost 9 years of my life yet I cant unscrew a freaking cap that's glued on or even mount a sight rails that is apparently for my gun.

It's a G&G btw.

redneck12 · June 20th, 2013, 19:44

Youtube is your friend, there are tons of videos on there about just about anything and everything airsoft related.

AnthB · June 20th, 2013, 20:27

Well for sure this sight rail is not going to work. I'm still working on the cap though and I think i'm going to lean more towards using my propane torch to melt the glue over boiling water.

HackD · June 20th, 2013, 21:15

It wouldn't be something so obvious as that the pitch treading is generally CCW for Tokyo Marui compatable Mp5's, would it be? No leftie-loosey.

If you've screwed it up beyond all recognition, have no fear, redemption is here.

http://www.airsoftparts.ca/store2/in...roducts_id=911

But I'd go this route.. looks meaner. (I did.)

http://www.airsoftparts.ca/store2/index.php?main_page=product_info&cPath=67_102&prod ucts_id=968

coach · June 20th, 2013, 21:46

Does the flash hider have a set/grub screw?

AnthB · June 20th, 2013, 21:47

Haha no I know its CCW threads its just the glue I guess has not melted yet. I actually bought that first link you posted. I have that already on my gun its just orange. Not 100% sure how to take the whole piece out though. Like i said I have been searching youtube for decent videos but I have not been having much luck.

From what I can see there is no screw like the ICS models.

HackD · June 20th, 2013, 22:53

Quote:

Originally Posted by AnthB

Haha no I know its CCW threads its just the glue I guess has not melted yet. I actually bought that first link you posted. I have that already on my gun its just orange. Not 100% sure how to take the whole piece out though. Like i said I have been searching youtube for decent videos but I have not been having much luck.

From what I can see there is no screw like the ICS models.

For my TM - there is a tiny allen key set-screw inset into the bottom of the sight post that loosens up the flash-hider assembly.

.

ARC-74 · June 20th, 2013, 23:00

The G&G 3 lug adapter is threaded , not held in place with a grub screw like TM & CA..
Remove the front sling pin then unscrew it from the outer barrel/ front sight.

AnthB · June 21st, 2013, 11:18

So I have the pin out. Once I start to loosen it then whole outer barrel spins with it. Trying to counter it with something but I dont want to squeeze too hard and bend it somehow. I can only assume that piece is glued at the threads as well.

coach · June 21st, 2013, 11:24

AnthB · June 21st, 2013, 11:28

Yeah im about to use a hammer to smash this whole gun and get a new one lol.

coach · June 21st, 2013, 12:08

or if you rather be cautious on it put it in a vice and crank on it. Just make sure no part of the metal outer barrel is within the vice.

ARC-74 · June 21st, 2013, 13:15

If you can't remove it, this silencer would probably work. It's a quick detach model that locks on to the 3 lugs.
http://www.airsoftparts.ca/store2/in...oducts_id=2090

It won't be secure as screwing onto threads, but is does fit the G&G.

AnthB · June 23rd, 2013, 11:04

Suffering with this thing . Im about done with trying to add things onto this gun, for now. After all this too I swear I heard my motor slip as well. Which is unfortunate because this gun is fairly new . Should have just bought a VFC like my brother to begin with.

logitikes · December 10th, 2013, 22:42

Any updates? I just removed my 3 lug adapter but i realized that the adapter is threaded on the inside.
So wouldnt that make http://www.airsoftparts.ca/store2/in...roducts_id=968 useless?
It doesnt look like it has threads on the inside. It looks like its secured by that notch on the adapter, while mine is threaded onto the outer barrel.
I think this http://airsoftdepot.ca/catalog/produ...oducts_id=1675 might work, can someone confirm it for me?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 20th, 2013, 19:11	#1
AnthB Trader rating Join Date: Jun 2013 Location: Toronto, Ontario	H&k mp5 A5 We'll so far I've played with this gun stock so I wanted to do a couple minor things like a suppressor and a red dot. However, The orange tip cap (with the threading under it) will not come off . Whether it be with my torch , hot water or straight force I just cannot get it off. I also bought a sight rail (NcSTAR mp5/H&k scoupe mount) but honestly that clearly will not fit on this gun . I am having just a painful time upgrading the smallest and easiest things to do. Anyone have any sort of tips, info or even a video I can watch ? It's so disheartening to be a Refrigeration mechanic for 8 , almost 9 years of my life yet I cant unscrew a freaking cap that's glued on or even mount a sight rails that is apparently for my gun. It's a G&G btw. Last edited by AnthB; June 20th, 2013 at 19:22..

June 20th, 2013, 23:00	#8
ARC-74 Can't Aim worth a damn!! old lady gives me heck for missing the toilet all the time. Trader rating Join Date: Apr 2011 Location: Montreal area & Tatooine	The G&G 3 lug adapter is threaded , not held in place with a grub screw like TM & CA.. Remove the front sling pin then unscrew it from the outer barrel/ front sight. __________________ Insert name here:

June 21st, 2013, 13:15	#13
ARC-74 Can't Aim worth a damn!! old lady gives me heck for missing the toilet all the time. Trader rating Join Date: Apr 2011 Location: Montreal area & Tatooine	If you can't remove it, this silencer would probably work. It's a quick detach model that locks on to the 3 lugs. http://www.airsoftparts.ca/store2/in...oducts_id=2090 It won't be secure as screwing onto threads, but is does fit the G&G. __________________ Insert name here:

June 20th, 2013, 19:44	#2
redneck12 Trader rating Join Date: Mar 2011 Location: Peterborough	Youtube is your friend, there are tons of videos on there about just about anything and everything airsoft related.

June 20th, 2013, 20:27	#3
AnthB Trader rating Join Date: Jun 2013 Location: Toronto, Ontario	Well for sure this sight rail is not going to work. I'm still working on the cap though and I think i'm going to lean more towards using my propane torch to melt the glue over boiling water.

June 20th, 2013, 21:15	#4
HackD Trader rating Join Date: Jul 2011 Location: Somewhere between Hamilton Ontario, and Hell..	It wouldn't be something so obvious as that the pitch treading is generally CCW for Tokyo Marui compatable Mp5's, would it be? No leftie-loosey. If you've screwed it up beyond all recognition, have no fear, redemption is here. http://www.airsoftparts.ca/store2/in...roducts_id=911 But I'd go this route.. looks meaner. (I did.) http://www.airsoftparts.ca/store2/index.php?main_page=product_info&cPath=67_102&prod ucts_id=968

June 20th, 2013, 21:46	#5
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot	Does the flash hider have a set/grub screw?

June 20th, 2013, 21:47	#6
AnthB Trader rating Join Date: Jun 2013 Location: Toronto, Ontario	Haha no I know its CCW threads its just the glue I guess has not melted yet. I actually bought that first link you posted. I have that already on my gun its just orange. Not 100% sure how to take the whole piece out though. Like i said I have been searching youtube for decent videos but I have not been having much luck. From what I can see there is no screw like the ICS models.

June 21st, 2013, 11:18	#9
AnthB Trader rating Join Date: Jun 2013 Location: Toronto, Ontario	So I have the pin out. Once I start to loosen it then whole outer barrel spins with it. Trying to counter it with something but I dont want to squeeze too hard and bend it somehow. I can only assume that piece is glued at the threads as well.

June 21st, 2013, 11:24	#10
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot

June 21st, 2013, 11:28	#11
AnthB Trader rating Join Date: Jun 2013 Location: Toronto, Ontario	Yeah im about to use a hammer to smash this whole gun and get a new one lol.

June 21st, 2013, 12:08	#12
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot	or if you rather be cautious on it put it in a vice and crank on it. Just make sure no part of the metal outer barrel is within the vice.

June 23rd, 2013, 11:04	#14
AnthB Trader rating Join Date: Jun 2013 Location: Toronto, Ontario	Suffering with this thing . Im about done with trying to add things onto this gun, for now. After all this too I swear I heard my motor slip as well. Which is unfortunate because this gun is fairly new . Should have just bought a VFC like my brother to begin with.

December 10th, 2013, 22:42	#15
logitikes Trader rating Join Date: Dec 2012 Location: Ontario	Any updates? I just removed my 3 lug adapter but i realized that the adapter is threaded on the inside. So wouldnt that make http://www.airsoftparts.ca/store2/in...roducts_id=968 useless? It doesnt look like it has threads on the inside. It looks like its secured by that notch on the adapter, while mine is threaded onto the outer barrel. I think this http://airsoftdepot.ca/catalog/produ...oducts_id=1675 might work, can someone confirm it for me?

H&k mp5 A5

Upgrades & Modifications