haven't bought AEGS in years, need help

[bladewalker]

okay Haven't bought or changed my load out in years and one of my friends has bought an old g36k from me and wants my help to get a few parts for it. only problem is I haven't ordered parts from overseas in long time. Can anyone tell me if a metal and plastic outer barrel, a plastic RAS, and a plastic magwell will have a reasonably good change to make it through customs?

I've included pictures of the items.

also does anyone know where I can order a pre-upgraded V3 completed mechbox?

[Tactical Elite]

never had any issues for me getting shipped over from Hong Kong. Got thru everytime. No custom hassle. But than again its everyones individuals luck.

[5kull]

If you stay away from lower receivers (lower body) and mags with false bullets, you should be okay. Make sure the parts are not available from a Canadian retailer. Theirs lots of choice now at similar prices

[L473ncy]

LCT V3 gearbox is a drop in, the other drop in V3 I would recommend is the VFC (Vega Force Co.) V3 gearbox.

LCT Front Wire: http://www.airsoftparts.ca/store2/in...oducts_id=2191
LCT Rear Wire: http://www.airsoftparts.ca/store2/in...oducts_id=2192

The VFC V3 gearbox, AirsoftGear.ca has them in their store but it's not online. ~$150 for the V3 drop in gearbox IIRC. Between the two you can't really go wrong with either. They're both Taiwanese made and pretty high quality. Haven't seen an LCT yet but the VFC should give you no problems.

As for the other parts, no problem.

[MaciekA]

Originally Posted by L473ncy

LCT V3 gearbox is a drop in, the other drop in V3 I would recommend is the VFC (Vega Force Co.) V3 gearbox.

LCT Front Wire: http://www.airsoftparts.ca/store2/in...oducts_id=2191
LCT Rear Wire: http://www.airsoftparts.ca/store2/in...oducts_id=2192

The VFC V3 gearbox, AirsoftGear.ca has them in their store but it's not online. ~$150 for the V3 drop in gearbox IIRC. Between the two you can't really go wrong with either. They're both Taiwanese made and pretty high quality. Haven't seen an LCT yet but the VFC should give you no problems.

As for the other parts, no problem.

Did you mean to suggest that the motor cage from that LCT drop-in mechbox would work in a G36 ? Is that actually possible?

[wildcard]

you can get a king arms V3 complete from airsoftparts.ca, I had the complete LCT box with motor, the motor was dead after a short burst (could be a bad batch) teh box itself looks good from the outside until you crack it open then out comes teh issue such as bad shim job, really brittle spring guide and a bent cylinder.

[L473ncy]

Originally Posted by MaciekA

Did you mean to suggest that the motor cage from that LCT drop-in mechbox would work in a G36 ? Is that actually possible?

Ah... Right.... Didn't connect the dots there when the OP was talking about getting the G36K, I usually just associate V3's with AK's.