|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 12th, 2005, 11:47
|
#1 |
|
Official ASC Bladesmith
|
Protect your new AI Duster Adpator
Just figured out that if you break off the top portion of the trigger assembly, it covers the adaptor perfectly! Check it out:
:tup: |
|
|
|
June 12th, 2005, 12:00
|
#2 |
|
Delierious Designer of Dastardly Detonations
    Join Date: Dec 2001
Location: in the dark recesses of some metal chip filled machine shop
|
linky no work
try this one: http://www.airsoftcanada.com/gallery...mage.php?i=750 So you pop off the top every time you want to fill a mag? That's not a bad idea. It'll protect the outlet stem on your can. I've drop tested this product and find that the adaptor usually survives, but the outlet stem snaps off.
__________________
Want nearly free GBB gas?  |
|
|
|
|
June 12th, 2005, 13:08
|
#3 |
|
Official ASC Bladesmith
|
Thanks for the right link, was in a hurry to get out and wasn't able to get the pic up, but saw the link and decided that was good enough.
Ya, pop off the top, use it, then put the top back on. Have a new M700 to feed, and since I only have a 10 shot mag, more than likely I'll have to carry duster on me if I need. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
