Eye-Tactical Training Mask

[ToRN]

I think you guys who are looking for a 'cooler' mask for use with airsoft, and can't wear regular ballistic glasses or goggles, because of field restrictions might get a kick out of this.

and of course, the gearsluts, can't forget the gearsluts.

http://www.rnicholls.com/catalog.php...roduct&id=2377

[Endymion]

I believe aZn_triXta07 got one of these a while back and did a review. Seems like a decent piece of kit.

[Wakingheart]

I have one of these for sale if anyone wants one.

[AngelusNex]

My friends goggles fog 5x as quikly when he wears his helmet pb mask combo which looks exactly like that, it fogs so fast due to the lack or air ventilation on the top.

[Hk-GUY]

Heres Mine. I finaly Multicam'd it.

[pOkiE]

haha i know i just commented on this on your other thread but how prone are these to fogging up? is there a fan built into it?

[Hk-GUY]

Mine has never fogged up ever actuly. It has venting all along the top and the nose is in the same chamber as the mouth so no heat from your breath gets in the eye area. There is cushion surrounding all around your eye chamber to keep out everything. I loves it.

[kullwarrior]

In stores/ online where do you find one, looks nice without loosing the militaristic style

[Drake]

I'm looking at the pictures on various sites, but I can't find any of the mask not installed on the helmet, so I'm not fully getting how it's mounted. More specifically, would it fit on a MICH/ACH (which is similarly shaped as the PASGT but doesn't have the brim on the front, and the sides/ear covers don't seem to drop down as low...)

Also, the mask seems to follow facial contours pretty well: how much does it actually affect aiming/cheek weld?

[Hk-GUY]

You can get the ACH / MICH adaptor direct from Eye Tactical for quoted to me at $15. The only difference is the top part that goes above the screen and connects the straps, it is a seperate peice(as well as many others) that comes off and you just need to put on the ACH version and it will fit correctly with those helmets. The ACH version has straps that go up and over the helmet from the front corners and leaves the front open to vent outside of the helmet, and allows for nightvision mounts aswell. I was going to get it but put of gettin the ACH helmet and did not need it yet.
See the instructions here from Eye Tactical themselves for a better explination of what I am talking about.

[T_A_N_K]

Originally Posted by Drake

I'm looking at the pictures on various sites, but I can't find any of the mask not installed on the helmet, so I'm not fully getting how it's mounted. More specifically, would it fit on a MICH/ACH (which is similarly shaped as the PASGT but doesn't have the brim on the front, and the sides/ear covers don't seem to drop down as low...)

Also, the mask seems to follow facial contours pretty well: how much does it actually affect aiming/cheek weld?

There actually is no mounting device, its purely held on by friction fit, and the back goggle strap. The mask is not sold separately, unless you find someone who bought it and only wants the helmet. Aiming would be difficult i suspect even with a 1 inch riser. Remember, no matter what they say, this is a paintball mask.

[Hk-GUY]

They do actuly have the SF version which has the lower area of the sides removed(lower cheak area) so that you can get your cheak down on the stock and aim better. I can aim fine with an eotech with no risers on my HK416. Now an aimpoint with no riser is a lil hard... you have to cock your head very sideways to see down it... but a riser should fix that pretty well. I use an EOTech 553 so it is extra high any way and is no problem at all with the mask. I would rather NOT have a bloody face or missing teeth so I will take a mask any day, it is quite hard to hit on chicks at the club after a skirmish when you have missing teeth and big bloody staff infection looking bubbles from bbs, LOL. Some wanna risk it though.