Full Magpul zhuckov convertion on airsoft AK

venomlodgik · September 19th, 2016, 16:19

Hi everyone

I'm trying to do a full conversion of an old CYMA CM-031 I got a while back. Problem ? found out it's a total piece of junk. The stock as no fitting for the zhukov stock nor the space in the receiver, except if I cut everything which is way to much trouble. Second the hand guard are a such a pain to remove, there are still things that won't fit the magpul handguard and the ultimak rail.

Is there out there an airsoft ak-74 that doesn't have the battery in the stock and will fit the stock ? i searched every where but couldn't find anything about ak fitting ... :banghead:

Disco_Dante · September 20th, 2016, 09:35

You'll need an AK with a side folding stock in order to attach a magpul folding stock to it. An AKs-74 or an AK74m, AK104, AK105, or even an AKs-74u will work.

venomlodgik · September 20th, 2016, 16:57

Thanks man !

you sure though ? from the install vid i've seen on the real deal. They need the part that attach to the orginal wood or polymer stock ?

Disco_Dante · September 21st, 2016, 09:33

Normally aftermarket AK folding stocks require a side-folding receiver. If it requires the stock tang, then the issue is probably the fact that you have a CYMA receiver that isn't to spec. Something like an LCT or an E&L will have a more accurate stock tang.

Orpheus · October 26th, 2016, 13:46

The zhukov stock does not under any circumstances require a folding trunnion. The folding mechanism is part of the stock itself.
The regular version is supposed to fit Warsaw Pact and Chinese *fixed* stock trunnions, the Yugo version obviously is meant for Yugo fixed trunnions.

Kingsix · October 27th, 2016, 02:57

If you are trying to fit a real stock on a airsoft gun you need lots of patience and be friends with a file, airsoft AEGs are generally not 1:1.

Exceptions to that rule would be the Realsword type 56 (MAK-90) and CTW AKM.

You might have more luck with a GHK AKM.

Some of the CYMA Aks even still use Type 3 AK-47 Style Stock Trunnion instead of the AKM/74 Style.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 19th, 2016, 16:19	#1
venomlodgik Trader rating Join Date: Sep 2016	Full Magpul zhuckov convertion on airsoft AK Hi everyone I'm trying to do a full conversion of an old CYMA CM-031 I got a while back. Problem ? found out it's a total piece of junk. The stock as no fitting for the zhukov stock nor the space in the receiver, except if I cut everything which is way to much trouble. Second the hand guard are a such a pain to remove, there are still things that won't fit the magpul handguard and the ultimak rail. Is there out there an airsoft ak-74 that doesn't have the battery in the stock and will fit the stock ? i searched every where but couldn't find anything about ak fitting ... :banghead:

September 20th, 2016, 09:35	#2
Disco_Dante Trader rating Join Date: Oct 2007 Location: GTA	You'll need an AK with a side folding stock in order to attach a magpul folding stock to it. An AKs-74 or an AK74m, AK104, AK105, or even an AKs-74u will work. __________________ Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life.

September 21st, 2016, 09:33	#4
Disco_Dante Trader rating Join Date: Oct 2007 Location: GTA	Normally aftermarket AK folding stocks require a side-folding receiver. If it requires the stock tang, then the issue is probably the fact that you have a CYMA receiver that isn't to spec. Something like an LCT or an E&L will have a more accurate stock tang. __________________ Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life.

September 20th, 2016, 16:57	#3
venomlodgik Trader rating Join Date: Sep 2016	Thanks man ! you sure though ? from the install vid i've seen on the real deal. They need the part that attach to the orginal wood or polymer stock ?

October 26th, 2016, 13:46	#5
Orpheus Trader rating Join Date: Mar 2015	The zhukov stock does not under any circumstances require a folding trunnion. The folding mechanism is part of the stock itself. The regular version is supposed to fit Warsaw Pact and Chinese fixed stock trunnions, the Yugo version obviously is meant for Yugo fixed trunnions.

October 27th, 2016, 02:57	#6
Kingsix Trader rating Join Date: Apr 2008 Location: Peoples Republic of Toronto	If you are trying to fit a real stock on a airsoft gun you need lots of patience and be friends with a file, airsoft AEGs are generally not 1:1. Exceptions to that rule would be the Realsword type 56 (MAK-90) and CTW AKM. You might have more luck with a GHK AKM. Some of the CYMA Aks even still use Type 3 AK-47 Style Stock Trunnion instead of the AKM/74 Style. __________________

Full Magpul zhuckov convertion on airsoft AK

Accessories Discussion