|
|
|
August 13th, 2015, 22:54
|
#16 |
|
I spend half my games waiting for you to come back from fixing that POS. lol
It's odd that it works fine and then deteriorates quickly once you put a couple of mags through it.
__________________
|
|
|
|
August 13th, 2015, 23:26
|
#17 |
|
Can't Aim worth a damn!! old lady gives me heck for missing the toilet all the time.
|
I'm probably way off here, but is your motor pinion gear loose at all?
.......grasping at straws here 
__________________
Insert name here:
|
|
|
|
|
August 14th, 2015, 00:38
|
#18 |
|
"bb bukakke" KING!
|
going to say at this point the pinion is not on the motor correctly or there's something wrong with the motor, maybe the pinion is loose on the shaft and is free spinning or something in the armature is fucked.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
|
|
|
|
August 14th, 2015, 00:49
|
#19 |
|
formerly steyr
|
When you were trying to shoot it on semi, was it cutting off and stopping if you held the trigger? Or did it just keep running?
You didn't have a picture of it but I'm assuming you checked the teeth on the underside of the sector gear, correct? |
|
|
|
|
August 14th, 2015, 05:27
|
#20 |
|
Both of those mentioned above are really the only 2 options left
__________________
WOLFPACK U-96 Cry Havoc, Let slip the Dogs of War! "Opportunities multiply as they are seized." - Sun Tzu, The Art of War |
|
|
|
|
|
August 14th, 2015, 08:15
|
#21 |
|
Acted normal before it died.
Pinion on motor is fine (d shape shaft). Motor has tons of torque. Going to check the gears again |
|
|
|
|
August 14th, 2015, 08:54
|
#22 |
|
butthurt for not having a user title
|
Is there any sign that the wiring is breaking loose and retarding the gears and/ or piston?
|
|
|
|
|
August 14th, 2015, 09:16
|
#23 |
|
"bb bukakke" KING!
|
check to see if the pinion is still FIRMLY attached. the hex screw loosens off on them pretty easily if you don't loctite them.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
|
|
|
|
August 14th, 2015, 09:17
|
#24 |
|
Wouldn't matter, a D-type pinion would not rotate freely even without the set screw.
I'm also certain that chaz would have noticed a loose pinion from the shaft...
__________________
The Steve has spoken. |
|
|
|
|
August 14th, 2015, 10:07
|
#25 |
|
|
The gun works perfectly fine until he puts a few mags through it and then it whines like the motor is backed out too far. The motor height apparently is not the issue though.
__________________
|
|
|
|
|
August 14th, 2015, 10:18
|
#26 |
|
|
Pinion has already been loctited.
No signs of wires fowling the gears. Steve will be getting the gun as soon as my gears come in. At this point I have no clue and just want it fixed and running again. I am fixing it more then I am playing. Oh paintball guns never had these issues (Flame on lol) |
|
|
|
|
August 14th, 2015, 10:25
|
#27 |
|
|
Maybe the Krylon fumes from the paint job have infused into the electronics.
__________________
|
|
|
|
|
August 14th, 2015, 10:26
|
#28 |
|
|
PEW PEW
WWHHIIIIIIIIIZZZZZ pfft! No More PEW PEW
__________________
|
|
|
|
|
August 14th, 2015, 10:27
|
#29 | |
|
And this kids, is why you buy 8 or 9 guns.
So when half of them are broken, the other half work.
__________________
Quote:
|
|
|
|
|
|
August 14th, 2015, 10:30
|
#30 | |
|
Ministry of Peace
|
Quote:
Quality guns these days are just fine for gaming, this isn't 2003 and all we can get are TM guns with shitty gears and low springs. @Chaz: Try putting all the stock parts back in, and then replacing them one at a time with your upgraded parts. Time consuming, but if one part is causing this that will tell you. |
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
