|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 7th, 2013, 15:51
|
#1 |
|
KSC MP7 Issues aslfter parts upgraded
I had received a KWC MP7 of my friend and it wasn't working due to the return springs in the bolt being fubar. I had added the new springs into a heavier bolt with a rocket valve and now when i pull the trigger with a loaded mag it kinda just spits out the bb, thats about it doesn't have enough to cycle itself. I am used to my m4's and m16's. If this is in the wrong section I apologize it wouldn't allow me to post it in the doctor's corner.
|
|
|
|
October 7th, 2013, 18:25
|
#2 |
|
Prancercise Guru
|
I think you answered your own question.
Heavier bolt. Start out will all stock parts and see how it runs. Then start swapping in the new stuff.
__________________
Airsoft, where nothing is hurt but feelings. |
|
|
|
|
October 7th, 2013, 19:18
|
#3 |
|
|
Ok i was given the gun as is the thing was kinda in pieces. Thanks
|
|
|
|
|
October 7th, 2013, 19:47
|
#4 |
|
|
Swapped back to the original bolt and it still is doing the same thing.
|
|
|
|
|
October 7th, 2013, 20:12
|
#5 |
|
Prancercise Guru
|
Check the seal in the bolt. It can dry out. It's inside part #23 on the exploded veiew.
http://kwausa.com/files/8713/0565/25...S08V01_MP7.jpg
__________________
Airsoft, where nothing is hurt but feelings. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
