|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
April 8th, 2013, 22:59
|
#1 |
|
Flash hider removal
sorry if this is posted in wrong section.
anyone have any experiance removing the flash hider from a CYMA M14 EBR? i've follow a few suggestions online, including heating it with a hair dryer for ~10mins then unscrewing with a pair of plyers, to no avail. any tips would be much apperiated. |
|
|
|
April 8th, 2013, 23:03
|
#2 |
|
Mr. Silencer
|
This was the ONLY way I can get my VFC flash hider off.
Went to home depot and picked up a torch. Came off like magic. Elite Force (VFC) 416 Flash Hider removal DIY - YouTube |
|
|
|
|
April 8th, 2013, 23:22
|
#3 | |
|
I used a huge wrench and ripped one off my JAvelin m24 lol, it was just a bunch of glue and didn't damage the barrel.
Is it plastic or metal? Is there a set screw hidden in it? Are you turning the right way?
__________________
Quote:
|
|
|
|
|
|
April 8th, 2013, 23:55
|
#4 | |
|
|
Quote:
|
|
|
|
|
|
April 9th, 2013, 00:14
|
#5 |
|
Try a heat gun if you have one, if not torch it but lightly.
__________________
“the kingdom of God is within man”, not one man nor a group of men, but in all men! In you! You, the people, have the power, the power to create machines, the power to create happiness! |
|
|
|
|
|
April 9th, 2013, 00:48
|
#6 | |
|
Heat-up and "tighten" to remove (turn clock-wise to unscrew).
Most china guns and the ones that are from the states come with superglue in the thread... Also double/triple check for a hidden cross-pin. There was one in my JG G36 that I did not see (and it was blocking the barrel...) *Edit: I got a few PMs... it was not across the barrel, only one side, but it was pushed too much in/too long and was in the path of the BB.
__________________
Quote:
Last edited by Kos-Mos; April 9th, 2013 at 02:15.. |
|
|
|
|
|
April 9th, 2013, 13:02
|
#7 |
|
It is probably torqued on along with red thread locker. Heat it up with a heat gun and turn only clockwise. If turn it back and forth, you could get galling and it will seize it on permanently.
|
|
|
|
|
April 9th, 2013, 14:17
|
#8 |
|
Banned
|
does anyone remember the guy who used a hacksaw to hack off the flashhider of his SVD?
don't do what he did. I have a whole set of wrenchs at home (metric) what I do is I find the correct size ussally its 14mm, there is going to be a section on the flashhider itself for the wrench, I heat it up a lil bit. and I twist off with the wrench, takes no longer than 2 minutes, either I'm good at it or really lucky |
|
|
|
|
April 9th, 2013, 18:14
|
#9 |
|
|
thanks for the help guys, came off with the added heat from the torch.
quick pick of what it has on it now (excuse the dirty blanket, dogs got to it before i had chance to clean their feet): 
Last edited by Duilin; April 9th, 2013 at 18:17.. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
