bad spring change

[horto]

when the case cracked under the piston head, were you test firing without the gearbox in the lower receiver?

[Stealth]

Originally Posted by ccyg8774

Every gearbox I worked with have a different part that likes to pop out...
Sometimes the trigger, sometimes the anti-reversal latch, the main spring, the tappet plate, or the wires...

You should look into some actual quality gearboxes...

The only thing that *should* be popping out of place is the spring/spring guide.

[ThunderCactus]

Most difficult box I've ever had to close was an ARES G36, nothing was staying in place lol

[Hectic]

Originally Posted by Stealth

You should look into some actual quality gearboxes...

The only thing that *should* be popping out of place is the spring/spring guide.

Agreed. The only issue i have closing the lonex box i have is the tappet plate pushing the sector gear to the front of the box but a well placed pinky finger holding the nozzel (and tappet) back a lil keeps this from happening and one finger through the window to h9ld the cylender piston spring and guide down and its easy peasy to close gears stay put arl stays in place even when opening if i stick a small screwdriver in the hole to stop the arl from comin out i.to the top half of the box it all stays in place those lonex shells are made to fit like a glove makes assembly alot less frustrating.