JT Alpha Goggles

xXNavigatorXx · June 16th, 2005, 18:16

I was out looking for a pair of goggles today and came across some "JT Elite Alpha" goggles in a store. Unfortunately, the guy in the sports section was clueless when it came to paintball/airsoft.

Does anybody know if in this setup the goggles and mask can be separated (so that only the goggles can be worn, without the full mask)? :neutral:

Oddjob · June 16th, 2005, 18:52

I have not had a JT goggle before that did not come apart. They have little plastic "plugs" holding them inside the goggles upper and lower vents (At least on my JT Spectras)

Telnets · June 16th, 2005, 19:31

Odd is right, they do come apart just fine.

[Avtomat] · June 17th, 2005, 19:22

o good they do, i plan on getting one of those cheap mask. im not buying thermal gogs cus i have glasses and im appying anti fog on my glasses might as well get a cheap mask and apply it on that too eh.

I think i can see the little transparent plugs on that mask, i see two(other two under the visor)...are those it? im not sure

xXNavigatorXx · June 19th, 2005, 20:40

Well, the problem with these is that the straps actually go through a slit in the plastic of the mask near the back. So I'm not sure how the straps would get through those slits.

xXNavigatorXx · June 19th, 2005, 20:44

Well the problem with these is that the straps for the goggles actually go through a slit in the plastic of the mask towards the back.

Below is a link to a picture of a pair of goggles/mask that has a similar setup (the straps going through the plastic). Although this isn't the mask I'm talking about, you can still see what I mean: http://i.walmart.com/i/p/00/78/75/36...V1_500X500.jpg

[Avtomat] · June 22nd, 2005, 09:49

o yes i see, but it doesnt matter much becasue most people just discard it when they remove the mask out of the goggle

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 16th, 2005, 18:16	#1
xXNavigatorXx Trader rating Join Date: Jun 2005	JT Alpha Goggles I was out looking for a pair of goggles today and came across some "JT Elite Alpha" goggles in a store. Unfortunately, the guy in the sports section was clueless when it came to paintball/airsoft. Does anybody know if in this setup the goggles and mask can be separated (so that only the goggles can be worn, without the full mask)? :neutral: __________________ "We are little flames, poorly sheltered by frail walls against the storm of dissolution and madness, in which we flicker and sometimes almost go out." - Paul Baumer, All Quiet on the Western Front

June 16th, 2005, 19:31	#3
Telnets Trader rating Join Date: Sep 2002 Location: Calgary Alberta	Odd is right, they do come apart just fine. __________________

June 17th, 2005, 19:22	#4
[Avtomat] Trader rating Join Date: Apr 2005 Location: Markham, Ontario	o good they do, i plan on getting one of those cheap mask. im not buying thermal gogs cus i have glasses and im appying anti fog on my glasses might as well get a cheap mask and apply it on that too eh. I think i can see the little transparent plugs on that mask, i see two(other two under the visor)...are those it? im not sure __________________ Army Glock 17 KJW M700 - gone ICS Ak74 - gone WE hi-capa 5.1 striker - gone TM Ak47 - gone Western Arms Inifnity 3.9 - gone Get your answers here! Answers: $5 Good Answers: $10 Correct Answers: $20 Well-researched Answers complete with reference: $150/hr plus materials

June 16th, 2005, 18:52	#2
Oddjob Trader rating Join Date: Feb 2003 Location: Oshawa, On	I have not had a JT goggle before that did not come apart. They have little plastic "plugs" holding them inside the goggles upper and lower vents (At least on my JT Spectras)

June 19th, 2005, 20:40	#5
xXNavigatorXx Trader rating Join Date: Jun 2005	Well, the problem with these is that the straps actually go through a slit in the plastic of the mask near the back. So I'm not sure how the straps would get through those slits. __________________ "We are little flames, poorly sheltered by frail walls against the storm of dissolution and madness, in which we flicker and sometimes almost go out." - Paul Baumer, All Quiet on the Western Front

June 19th, 2005, 20:44	#6
xXNavigatorXx Trader rating Join Date: Jun 2005	Well the problem with these is that the straps for the goggles actually go through a slit in the plastic of the mask towards the back. Below is a link to a picture of a pair of goggles/mask that has a similar setup (the straps going through the plastic). Although this isn't the mask I'm talking about, you can still see what I mean: http://i.walmart.com/i/p/00/78/75/36...V1_500X500.jpg __________________ "We are little flames, poorly sheltered by frail walls against the storm of dissolution and madness, in which we flicker and sometimes almost go out." - Paul Baumer, All Quiet on the Western Front

June 22nd, 2005, 09:49	#7
[Avtomat] Trader rating Join Date: Apr 2005 Location: Markham, Ontario	o yes i see, but it doesnt matter much becasue most people just discard it when they remove the mask out of the goggle __________________ Army Glock 17 KJW M700 - gone ICS Ak74 - gone WE hi-capa 5.1 striker - gone TM Ak47 - gone Western Arms Inifnity 3.9 - gone Get your answers here! Answers: $5 Good Answers: $10 Correct Answers: $20 Well-researched Answers complete with reference: $150/hr plus materials

JT Alpha Goggles

Gear Discussion