AK Parts not Fitting....

[Conflicts6]

i got everything to fit, thanks everyone for the help.

[Styrak]

How did you get the stock adapter to fit?

[Conflicts6]

Originally Posted by Styrak

How did you get the stock adapter to fit?

I took out that block that would attack to a fullstock, and drilled holes and bolted it to the body itself

[Desmodus]

I dunno if its just me... but shouldn't that M4 stock be sitting... straighter? It looks like its taking a dive towards the left.

for example:

http://arniesairsoft.co.uk/news2/wp-...takticalv2.jpg

Notice how its straight. Yours looks like its really angled.

[Conflicts6]

ya its angled, its how the stock tube is designed, this one at least. It comes up to the shoulder better.

[Styrak]

Yeah that's.....a pretty bad McGuyver job there.

[Conflicts6]

Originally Posted by Styrak

Yeah that's.....a pretty bad McGuyver job there.

yupp.....

[pusangani]

Oh crap! Wow

[Boyso]

The block from the stock is at least one inch away from the body...

Use your dremel until it fits. And don't mod the body of the gun, mod the accessory...

[Conflicts6]

Originally Posted by LastSpartan

The block from the stock is at least one inch away from the body...

Use your dremel until it fits. And don't mod the body of the gun, mod the accessory...

I used the dremel as much as I could on the stock. The design is really weird. And it can still go back to my other sock, I just drilled holes into those tabs on the receiver to put a nut and a bolt through. Its a pretty bad mgyver job like styrak said. I might just order one of those m4 stock adapters that screw into that 'block' and you add your own stock pipe, that might work better.