Quote:
Originally Posted by Kos-Mos
Because I read the threads YOU started about two problematic P90s...
YOU stated that one gun was yours and the other was a friend's P90.
And since you just said you never used a 11.1v LiPo in your rifles, how can you know that is causing issues in this specific case.
It is just like in a lot of situations, treating symptoms will not always solve the problem. Bending contacts is a very temporary solution. Mostly because when you heat metals that have been treated, they tend to reshape the way they where when treated. In this case, the original position is causing issues, so just by using the rifle, the contacts will bend back and the issue will show-up again.
That is exactly why there is very little "gundocs" and a lot of tinkerers. JB weld and bending things is not fixing.
|
Listen man: you have to USE that brain of yours! If not, then please leave the rest of us alone.
First of all. I never started any threads here on ASC yet. Are you talking about posts, and if so, then please at least read them properly! Secondly, please be so kind to refer to them if you ended up not reading them properly after all.
As stated I don't USE 11.1v lipos, but I sure did TEST it on my own P90s and misc gearboxes. I'm seriously puzzled how that didn't come to mind when you read my posts. Oh wait! I'm not
Oh and I never stated that I had problems on two P90s. There were two Echo1 P90 gearboxes that had their primary trigger assembly bent, and needed some shaping (not reshaping, shaping. The gearboxes were new). That's china quality for ya, but luckily it's easy to fix such problems. These gearboxes were purchased for hot-swapping according to usage/FPS. After that I mentioned a completely different weapon/gearbox altogether. A Marui P90, that had the lipo-related problem. This was my friends weapon.
And seriously, are you just trying to annoy me, or are you really this stupid?! When you run a mosfet on a gun, there's not nearly enough current passing through the trigger assembly to even slightly upping the temp of it. Yeah unless it's "gun doc" Kos-Mos selfmade aluminum foil trigger contacts...