review: Unicorn AKS-74U

mateba · September 25th, 2007, 21:21

It came from http://www.airsoft-war4.com/w4_aeg.php?b=China shipping was $84 with a battery.

I got the Unicorn AKS-74U in today. Im a happy! It f@#$%^g rocks! Nice ROF, quick response, all steel (either cast or stamped), shoots at ~340FPS, and it'll hold a 10.8v mini easily. I did find some small issues with the stock and the bolt/hop-up cover. The stock's joint could be shimmed a little although I'm not sure how. I don't see a lot or screws to tighten or a way to take apart the stock. When fully extended the stock sometimes doesn't catch and can come loose with a light slap. The stud inside the stock well is a little small so if it were bigger I think the problem would be solved. Once the stock is correctly extended its solid with no wiggle. The hop-up cover is spring powered and has a large tab that lays between the battery and the MB. There is a path for it to follow but its not defined enough to call it a track. It kinda sits in there. When the upper receiver is closed the unit is fine but the tab can get stuck on the battery. When its working properly it has a nice metallic slap. Its all fit and finish but for $135 you cant complain. The paint on the flash hider just flaked off. I scrapped it off with my fingers in 10 minutes. The flash hider unscrews, an adapter unscrews and there are 14mm threads. So, it'll take after market muzzle devices. It really looks good, it feels good and its load! Its report is a nice sharp snap. I would recommend this to anyone looking for a small AEG. A must have for an AK fan. I'll put up some pictures later.

I took some measurements.
29" stock extended
<20" stock folded
<~14" of battery storage
The wiring is in 18ga
There are Russian trade marks
laminated wood fore grips
The upper receiver is spring powered. Once the receiver tab is pushed in the top opens and stay open. I found that once everything is inside and the cover is closed, the tab stick but if you rack the bolt it push it out.
I believe you would want a battery with a width of not more than 3/4" I have AA cells in mine. There is a little play but not much. At most I think you could get 4/5A or 2/3A cells to fit. Basically you need some form of mini battery. You could fit a 14.4v 1500mah (2/3A) mini battery.

the pencil point to the tab in the stock well the needs to be bigger.

the pencil points the space in the stock joint that could be shimmed.

the bolt cover is stuck again.

the hop-up cover just sits on top of the MB

again...

notice the measuring tape

soon to come... "AKS-74U PTW"

Dicey · September 25th, 2007, 21:27

Sexy gun, man! Nice purchace you got there.

Daes · September 25th, 2007, 22:07

Quote:

Originally Posted by mateba

soon to come... "AKS-74U PTW"

You know, it would be quite possible for a cool K and a ton of work. The body is already up to par. Think of the fame that would follow if you documented the steps taken...

(certainly small enough, cylinders might be an issue though)

-Daes

Chrios · September 25th, 2007, 22:26

I'd like to know how it handles in a game. I'm just too much of a skeptic to believe it can be that great for 85 clams, even if it is made by a company called "unicorn".

EDIT: no, stryak, it's just that I can't read proper english

joker060 · September 25th, 2007, 22:35

You bought this and had it shipped through customs?? If so, tsk tsk...

mateba · September 25th, 2007, 23:15

Thank you. I like to think so.

I am one of the lucky ones. USA! USA! USA! sry, couldn't help it.

To get this to what I would call a PTW will cost another $100US, sorry I didn't mention the currency before.

I should be able to report able game play in two weeks. I have a big game in mid Oct. I'm aiming to have it complete by the game.

I'm going to continue the overhaul in the upgrade section. I'll try to test my ROF and get a video of it shooting. I sounds great.

mateba

Moz · September 26th, 2007, 01:33

I hate you, and I hope you and your beautiful gun die :/

mateba · September 26th, 2007, 11:31

here is a video

Video of Unicorn AK-74U AKS-74U - Photobucket - Video and Image Hosting

mateba

mateba · September 26th, 2007, 15:44

I used audacity to record my AEG. These are my results to my ROF test.

I averaged 923 rpm and 15.4rps on a fresh 8.4v 2200 nimh

mateba

nost88 · October 7th, 2007, 14:35

howd you get the gun into canada? i thought you couldnt import them

ancorp · October 7th, 2007, 15:40

Quote:

Originally Posted by nost88

howd you get the gun into canada? i thought you couldnt import them

By yourself you can't, but a retailer/importer can sometimes get one for you.

Fidget11 · October 8th, 2007, 03:06

ummm considering that his user location says Birmingham i would be willing to bet he is in the UK.

that said i am sure that the retailers have been contacted already about bringing in the unicorn or d-boys versions of this.

Ronan · October 8th, 2007, 03:29

He stated he lived in the US...

Quote:

Originally Posted by mateba

I am one of the lucky ones. USA! USA! USA! sry, couldn't help it.

Styrak · October 8th, 2007, 03:37

Quote:

Originally Posted by Chrios

I'd like to know how it handles in a game. I'm just too much of a skeptic to believe it can be that great for 85 clams, even if it is made by a company called "unicorn".

I believe he said the SHIPPING was $84. Which sucks. Unless he can't type proper english.

Quote:

Originally Posted by mateba

It came from http://www.airsoft-war4.com/w4_aeg.php?b=China shipping was $84 with a battery.

Also, shouldn't this be in the "Reviews" section?

mateba · October 8th, 2007, 09:49

Of course I can type proper english.

I do live in the US, in Birmingham Alabama. The AEG cost $241USD to the door with a 8.4v 2200 battery. considering the stamped steal body, wood grips, and 6.04mm TBB, I figured the cyma internals were a plus to a great body kit of one of the rarer seen AEGs on the market. I was looking at the Echo1 AK CPM but the lower receiver is plastic. The Unicorn weathers and can be blued like a real gun.
Admin, sorry for the inconvenience if this post needs to be moved.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 25th, 2007, 21:21	#1
mateba Trader rating Join Date: Feb 2007 Location: Alabama, USA	review: Unicorn AKS-74U It came from http://www.airsoft-war4.com/w4_aeg.php?b=China shipping was $84 with a battery. I got the Unicorn AKS-74U in today. Im a happy! It f@#$%^g rocks! Nice ROF, quick response, all steel (either cast or stamped), shoots at ~340FPS, and it'll hold a 10.8v mini easily. I did find some small issues with the stock and the bolt/hop-up cover. The stock's joint could be shimmed a little although I'm not sure how. I don't see a lot or screws to tighten or a way to take apart the stock. When fully extended the stock sometimes doesn't catch and can come loose with a light slap. The stud inside the stock well is a little small so if it were bigger I think the problem would be solved. Once the stock is correctly extended its solid with no wiggle. The hop-up cover is spring powered and has a large tab that lays between the battery and the MB. There is a path for it to follow but its not defined enough to call it a track. It kinda sits in there. When the upper receiver is closed the unit is fine but the tab can get stuck on the battery. When its working properly it has a nice metallic slap. Its all fit and finish but for $135 you cant complain. The paint on the flash hider just flaked off. I scrapped it off with my fingers in 10 minutes. The flash hider unscrews, an adapter unscrews and there are 14mm threads. So, it'll take after market muzzle devices. It really looks good, it feels good and its load! Its report is a nice sharp snap. I would recommend this to anyone looking for a small AEG. A must have for an AK fan. I'll put up some pictures later. I took some measurements. 29" stock extended <20" stock folded <~14" of battery storage The wiring is in 18ga There are Russian trade marks laminated wood fore grips The upper receiver is spring powered. Once the receiver tab is pushed in the top opens and stay open. I found that once everything is inside and the cover is closed, the tab stick but if you rack the bolt it push it out. I believe you would want a battery with a width of not more than 3/4" I have AA cells in mine. There is a little play but not much. At most I think you could get 4/5A or 2/3A cells to fit. Basically you need some form of mini battery. You could fit a 14.4v 1500mah (2/3A) mini battery. the pencil point to the tab in the stock well the needs to be bigger. the pencil points the space in the stock joint that could be shimmed. the bolt cover is stuck again. the hop-up cover just sits on top of the MB again... notice the measuring tape soon to come... "AKS-74U PTW"

September 25th, 2007, 22:26	#4
Chrios Trader rating Join Date: Sep 2003	I'd like to know how it handles in a game. I'm just too much of a skeptic to believe it can be that great for 85 clams, even if it is made by a company called "unicorn". EDIT: no, stryak, it's just that I can't read proper english Last edited by Chrios; October 8th, 2007 at 12:30..

September 25th, 2007, 23:15	#6
mateba Trader rating Join Date: Feb 2007 Location: Alabama, USA	Thank you. I like to think so. I am one of the lucky ones. USA! USA! USA! sry, couldn't help it. To get this to what I would call a PTW will cost another $100US, sorry I didn't mention the currency before. I should be able to report able game play in two weeks. I have a big game in mid Oct. I'm aiming to have it complete by the game. I'm going to continue the overhaul in the upgrade section. I'll try to test my ROF and get a video of it shooting. I sounds great. mateba Last edited by mateba; September 25th, 2007 at 23:35..

September 26th, 2007, 01:33	#7
Moz Trader rating Join Date: Aug 2006 Location: Toronto, Ontario	I hate you, and I hope you and your beautiful gun die :/

September 26th, 2007, 11:31	#8
mateba Trader rating Join Date: Feb 2007 Location: Alabama, USA	here is a video Video of Unicorn AK-74U AKS-74U - Photobucket - Video and Image Hosting mateba

September 26th, 2007, 15:44	#9
mateba Trader rating Join Date: Feb 2007 Location: Alabama, USA	I used audacity to record my AEG. These are my results to my ROF test. I averaged 923 rpm and 15.4rps on a fresh 8.4v 2200 nimh mateba

October 7th, 2007, 14:35	#10
nost88 Trader rating Join Date: Oct 2007 Location: Hamilton, ON	howd you get the gun into canada? i thought you couldnt import them

October 8th, 2007, 03:06	#12
Fidget11 Trader rating Join Date: Apr 2006 Location: Edmonton, Alberta.	ummm considering that his user location says Birmingham i would be willing to bet he is in the UK. that said i am sure that the retailers have been contacted already about bringing in the unicorn or d-boys versions of this. __________________ Stop Sulking About It! - Prioritize & Organize! - Canadian Airsoft Is Not A Crime! Primary: G36K Secondary: FMU SIG P226

October 8th, 2007, 09:49	#15
mateba Trader rating Join Date: Feb 2007 Location: Alabama, USA	Of course I can type proper english. I do live in the US, in Birmingham Alabama. The AEG cost $241USD to the door with a 8.4v 2200 battery. considering the stamped steal body, wood grips, and 6.04mm TBB, I figured the cyma internals were a plus to a great body kit of one of the rarer seen AEGs on the market. I was looking at the Echo1 AK CPM but the lower receiver is plastic. The Unicorn weathers and can be blued like a real gun. Admin, sorry for the inconvenience if this post needs to be moved.

review: Unicorn AKS-74U

Airsoft Guns Discussion