Airsoft Canada

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Marui P226 valve knocker problem


Doctor's Corner

Thread Tools
Old April 23rd, 2021, 22:37   #1
One of those username tags...
NAAZ's Avatar
Join Date: Aug 2016
Location: Trenton, ON
Marui P226 valve knocker problem

Main issue: gun doesn't dry fire*

Problem is replicated by:
-inserting an empty magazine
-racking the slide with thumb on the slide release
-pulling the trigger
-gun doesn't dry fire

Not sure if this issue pertains only to me, but basically in my TM P226 with Guarder kit and Guarder chassis assembly, the valve knocker doesn't lock back when a magazine is inserted.

I cock the hammer, insert the magazine and then release the magazine, and I see that the valve knocker is still in the forward position. this means that when the trigger is pulled, the hammer will not hit the knocker.

diagram 1 (hammer cocked, magazine inserted and removed, valve knocker still in the same position. the gas valve doesn't push the knocker back to lock it)

diagram 2 (hammer cocked, valve knocker can be manually locked back with finger)

*if I manually engage the valve knocker lock, then insert the magazine, rack the slide with thumb on the slide release, pull the trigger, the gun will continue to dry fire until out of gas.
Heckler & Koch: buy once, cry once.

Last edited by NAAZ; April 23rd, 2021 at 22:44..
NAAZ is offline   Reply With Quote
Old April 24th, 2021, 03:20   #2
RainyEyes's Avatar
Join Date: Sep 2013
Location: Scarbororororough
Are you only visually inspecting the valve knocker or are you feeling it when you dry fire and putting your finger on it to feel if there's any movement?

The valve knocker is supposed to be free moving to accomodate a magazine change...
RainyEyes is offline   Reply With Quote

Go Back   Airsoft Canada > Discussion > Doctor's Corner


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Airsoft Canada

All times are GMT -4. The time now is 05:06.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.