![]() |
![]() |
#16 |
IronOverlord
|
I wasn't talking about the hopup rubber , but the little nub under the hop lever, that pushes down in the slot on the bump. Mine seemed very soft and didn't seem to work very well. The mod looks good and I will test it in about 15 minutes.
__________________
![]() |
![]() |
![]() |
![]() |
#17 |
LOL... i can see the fault, but i do remember making sure i assemble it correctly, groove/alignment and all.. but this proves me wrong... and this is at MAX!!
![]() dissembling as we chat..
__________________
Armory: -Primary: Upgraded CYMA AKs74u -Side Arm: KJW Sig Sauer P226 |
|
![]() |
![]() |
![]() |
#18 |
IronOverlord
|
That looks about right to me, but I will defer to more experience.
__________________
![]() |
![]() |
![]() |
![]() |
#19 | |
Quote:
__________________
Armory: -Primary: Upgraded CYMA AKs74u -Side Arm: KJW Sig Sauer P226 |
||
![]() |
![]() |
![]() |
#20 |
alright so i jut twisted the inner barrel a bit to the right and my result is this...
![]()
__________________
Armory: -Primary: Upgraded CYMA AKs74u -Side Arm: KJW Sig Sauer P226 |
|
![]() |
![]() |
![]() |
#21 |
looks fine to me man.
__________________
![]() |
|
![]() |
![]() |
![]() |
#22 |
uuuuugh.. now another thing. (this is not the same view, this is where the BB's feed from the magazine)
![]() is this a problem or normal? when i drop a BB in, it sits on the rubber, i give it a little push so it drops completely in..
__________________
Armory: -Primary: Upgraded CYMA AKs74u -Side Arm: KJW Sig Sauer P226 |
|
![]() |
![]() |
![]() |
#23 |
The size of the bump looks very good
Ya, I have no idea what happened there with the last pic |
|
![]() |
![]() |
![]() |
#24 |
IronOverlord
|
well I am having multiple feed problems now. I can put a BB in the barrel and it won't fall out, but it will not fire first shot, second shot 2 or 3 BBs come out. Then next shot nothing , folowed by 2 or three again.
![]()
__________________
![]() |
![]() |
![]() |
![]() |
#25 |
iron, it seems like you may need to put the proper one back
__________________
Armory: -Primary: Upgraded CYMA AKs74u -Side Arm: KJW Sig Sauer P226 |
|
![]() |
![]() |
![]() |
#26 |
When you set the hop-up to zero, do it still cause problems (2-3 shotgun effect)?
You can try to move the inner/rubber a little bit around to make it set to the right place. It worked for a problematic G36C I had to work on. |
|
![]() |
![]() |
![]() |
#27 |
just an update, thanks for all that helped or giving me tips. i think i fixed both of my problems and ill do a test this sunday
__________________
Armory: -Primary: Upgraded CYMA AKs74u -Side Arm: KJW Sig Sauer P226 |
|
![]() |
![]() |
![]() |
#28 |
IronOverlord
|
Yeah I already got it apart and inspecting everything. I will put the old piece in and see if it still does it. It was firing fine before, I didn't change the hopup just changed that teenie tiny litle rubber nub, to one a bit firmer. It gave a nice bump, whereas the original nub seemed to hardly make one at all. Just going t reassemble now. I am glad this gun is quick and easy to open up and close. CA HK53A2
EDIT-- Gun is back together and firing fine, It is dark out so range testing for distance and accuracy is out, for tonight anyway. But feed problem is fixed, and it is shooting as good as it was before the barrel change. So all is good in the workshop. Thanks for the help fellows.
__________________
![]() Last edited by Schlyder; October 30th, 2008 at 00:41.. |
![]() |
![]() |
![]() |
#29 |
IronOverlord
|
Hmmmmm, .20 seem to feed good, no problems, ran a lowcap of .28s and I get a feeding issue again, I will try .25s next. Anyone know what the reason for this is?? Do I need a harder rubber? I am also using pretty new lowcaps(fielded once.)
__________________
![]() Last edited by Schlyder; October 30th, 2008 at 01:13.. |
![]() |
![]() |
![]() |
#30 |
have you done any mechbox upgrades? also is it just misfeeding every few shots?
__________________
![]() |
|
![]() |
![]() |
![]() ![]() |
|
Bookmarks |
|
|
![]() |