|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 8th, 2011, 00:41 | #16 |
So it's used as a standoff to push the hopup unit closer to the mechbox then?
|
|
March 8th, 2011, 11:31 | #17 |
As far as o know thats what its for. Until i see another src m4. I cant confirm
__________________
My Trade Rating http://airsoftcanada.com/itrader.php?u=55278 |
|
March 9th, 2011, 10:41 | #18 |
While you are at it, does SRC incorporate a SCS to their nub/arm? At least that's what I heard.
|
|
March 9th, 2011, 11:57 | #19 |
I dont think that i saw it when i had it out. Ill check again an inform
__________________
My Trade Rating http://airsoftcanada.com/itrader.php?u=55278 |
|
March 9th, 2011, 14:48 | #20 |
My SRC hop up has SCS, and it is molded as part of the arm, it can't be removed.
Last edited by maverick5770; March 9th, 2011 at 14:50.. |
|
March 27th, 2011, 03:23 | #21 |
Confirmed that it has the SCS on the nub/arm. I just dont like how the SRC strips though. You have to tear everything from pistol grips to stock tube to get the upper receiver off to get to the hop assembly
|
|
March 27th, 2011, 10:16 | #22 | |
a.k.a. Palucol
|
Quote:
You can always separated the upepr off without disassembling, but you'll rip some internals off...or break the rear body tabs... but that pain the ass reflects in the sturdiness of the gun when assembled! |
|
March 27th, 2011, 10:26 | #23 |
on my SRC 416 i only need to take out the front body pin, and i can slide the upper and outer barrel off and get at the hopup, no rear body tabs on my 416 either.
|
|
|
Bookmarks |
|
|