|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 25th, 2017, 01:13
|
#1 |
|
Top and bottem reciever
Hey first of I didn't know where to put this. Just got a question today was working on my friends g&g predator and I'm having a head time putting the top and bottem reciever together as things look I'm going to have to use a hammer to get it togther. I compared everything to my own predator (which is a little tough to her together but not to bad) and I can't see any differences. Question is is it normal to be that different
|
|
|
|
|
February 25th, 2017, 01:36
|
#2 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
There's usually some wiggling involved to get stuff aligned on tight toleranced receivers. You shouldn't need a hammer.
|
|
|
|
|
February 25th, 2017, 01:43
|
#3 |
|
Your hop up chamber might not be sitting flush and preventing them from coming together properly. Put down the hammer and examine it properly before you break anything.
|
|
|
|
|
February 25th, 2017, 12:23
|
#4 |
|
So I took a look at it last night and the hop up looks fine. I can't see any differences between the two. Also I can't see anything catching when I slide them together. It's the last 1/4 inch. It's like it's hitting a wall
|
|
|
|
|
|
February 25th, 2017, 12:45
|
#5 |
|
|
Is the hop up going onto the nozzle of the gearbox and not INTO the gearbox? Look from the magwell.
Post some pics. |
|
|
|
|
February 25th, 2017, 21:46
|
#6 | ||
|
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
faux bolt or charging handle in the way
__________________
Quote:
Quote:
FinchFieldAirsoft |
||
|
|
|
|
February 28th, 2017, 16:57
|
#7 |
|
So took same time today to finish the gun. The issue was the spring from the stock hop up stayed in the gun then when I put the new one in I used a but of glue to hold it in place. So when I was putting it in the 2 spring collided and didn't allow it to move ahead that tiny bit. Pulling the old one out and now it works
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
