Help identifying battery connector?

iharuyuki · April 30th, 2016, 17:18

Just bought a new gun, not sure what connector it is to buy battery with.

Isn't like a deans or mini tamiya.

Thank you so much!

Danke · April 30th, 2016, 17:24

Looks like this.

http://www.airsoftparts.ca/store2/in...oducts_id=2797

iharuyuki · April 30th, 2016, 17:49

Seems like it to me, thanks so much!

XT60 connector.

Now obviously these aren't common for airsoft. What do you guys recommend me to do? Should I buy an adapter off eBay (potentially weeks in shipping) or solder it myself?

Datawraith · April 30th, 2016, 17:51

Cut it, and solder it to deans. Much lower resistance and more durable than a Tamiya, and much more easily found than your XT60. I found adapters increase the resistance significantly, and is another breaking point in your wiring (ie, not as robust).

AnthonyG · April 30th, 2016, 18:57

Go for deans. Either order a bunch off eBay, or go to your local hobby shop.

Kos-Mos · April 30th, 2016, 20:00

XT60 are way better, and way easier to find that Deans.
Almost all new LiPo batterie (except airsoft) now come from factory with this.

If you have space, leave the XT60, as the name implies, it can take 60A safely. Dean's can do 40A at best if they are genuine (not likely), arounds 20A otherwise. The max current is directly related to the resistance caused by the connector.

From the looks of it, that's an M60 or similar support weapon ammo pouch. Get a 7000mAh 7.4v RC Car pack, it will be easy to find with XT60 already and should be enough for a full day of airsoft.

Datawraith · April 30th, 2016, 20:09

Quote:

Originally Posted by Kos-Mos

XT60 are way better, and way easier to find that Deans.
Almost all new LiPo batterie (except airsoft) now come from factory with this.

If you have space, leave the XT60, as the name implies, it can take 60A safely. Dean's can do 40A at best if they are genuine (not likely), arounds 20A otherwise. The max current is directly related to the resistance caused by the connector.

From the looks of it, that's an M60 or similar support weapon ammo pouch. Get a 7000mAh 7.4v RC Car pack, it will be easy to find with XT60 already and should be enough for a full day of airsoft.

Problem with that is if your battery dies on you (either run out of charge or just plain quits), you'd have to be REALLY lucky to find somebody else with a spare battery with an XT60. AFAIK, Deans seems to be the convention for battery connectors with airsoft right now and should be easy to find someone with a spare they're willing to lend you.

Kos-Mos · April 30th, 2016, 21:11

Quote:

Originally Posted by Datawraith

Problem with that is if your battery dies on you (either run out of charge or just plain quits), you'd have to be REALLY lucky to find somebody else with a spare battery with an XT60. AFAIK, Deans seems to be the convention for battery connectors with airsoft right now and should be easy to find someone with a spare they're willing to lend you.

http://www.hobbyking.com/hobbyking/s...e_Tamiya_.html

and/or

http://www.hobbyking.com/hobbyking/s...Lead_2pc_.html

cetane · April 30th, 2016, 22:21

http://www.dx.com/p/t-plug-female-to...9#.VyVoD8j3aJJ

http://www.dx.com/p/t-plug-male-to-x...5#.VyVnzsj3aJJ

AnthonyG · May 1st, 2016, 01:34

The RC world went from Tamiya to deans (and others, like TRX and bullet connectors) and is now predominantly XT-60. Genuine deans have had a history of being expensive, which is part of the reason XT-60s have caught on. They're cheap, and idot-proof, and non-proprietary if I remember correctly. Performance different in terms of resistance between the two connectors is inconsequential for airsoft. Hobby King also had some sort of fallout with deans, as in the company, which is why we're seeing fewer packs being made with deans connectors.

In my opinion deans are better for airsoft, especially when a gun is setup to use buffer-tube lipos. XT-60s are larger, and hard to fit in tight places.

Sent from my Nexus 5 using Tapatalk

ThunderCactus · May 1st, 2016, 11:05

At the amperages most of us are running at, it really doesn't matter.
If you're running a high amp loading gun and spamming the trigger, even with a 30A load you're well within the capacity of normal deans. It's also burst loading and not constant load.
XT60 might get a better connection, but you don't really need it. They're also larger than deans, which is annoying.

The XT30 would be a better option than the XT60, still good to 30A and actually smaller than deans.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 30th, 2016, 17:24	#2
Danke Prancercise Guru Trader rating Join Date: Oct 2007 Location: Danger Zone	Looks like this. http://www.airsoftparts.ca/store2/in...oducts_id=2797 __________________ Airsoft, where nothing is hurt but feelings.

April 30th, 2016, 18:57	#5
AnthonyG LUser Title Trader rating Join Date: Aug 2014 Location: Pickering/Toronto	Go for deans. Either order a bunch off eBay, or go to your local hobby shop. __________________ *Busy signing for his packages*

April 30th, 2016, 22:21	#9
cetane Trader rating Join Date: Jun 2010 Location: Markham & Stouffville - Ontario - Canada	http://www.dx.com/p/t-plug-female-to...9#.VyVoD8j3aJJ http://www.dx.com/p/t-plug-male-to-x...5#.VyVnzsj3aJJ __________________ Looking to get age verified in York region? Click link...

April 30th, 2016, 17:49	#3
iharuyuki Trader rating Join Date: Feb 2016 Location: Toronto, Ontario	Seems like it to me, thanks so much! XT60 connector. Now obviously these aren't common for airsoft. What do you guys recommend me to do? Should I buy an adapter off eBay (potentially weeks in shipping) or solder it myself?

April 30th, 2016, 17:51	#4
Datawraith Trader rating Join Date: Oct 2014 Location: Markham	Cut it, and solder it to deans. Much lower resistance and more durable than a Tamiya, and much more easily found than your XT60. I found adapters increase the resistance significantly, and is another breaking point in your wiring (ie, not as robust).

May 1st, 2016, 01:34	#10
AnthonyG LUser Title Trader rating Join Date: Aug 2014 Location: Pickering/Toronto	The RC world went from Tamiya to deans (and others, like TRX and bullet connectors) and is now predominantly XT-60. Genuine deans have had a history of being expensive, which is part of the reason XT-60s have caught on. They're cheap, and idot-proof, and non-proprietary if I remember correctly. Performance different in terms of resistance between the two connectors is inconsequential for airsoft. Hobby King also had some sort of fallout with deans, as in the company, which is why we're seeing fewer packs being made with deans connectors. In my opinion deans are better for airsoft, especially when a gun is setup to use buffer-tube lipos. XT-60s are larger, and hard to fit in tight places. Sent from my Nexus 5 using Tapatalk __________________ *Busy signing for his packages*

May 1st, 2016, 11:05	#11
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	At the amperages most of us are running at, it really doesn't matter. If you're running a high amp loading gun and spamming the trigger, even with a 30A load you're well within the capacity of normal deans. It's also burst loading and not constant load. XT60 might get a better connection, but you don't really need it. They're also larger than deans, which is annoying. The XT30 would be a better option than the XT60, still good to 30A and actually smaller than deans.

Help identifying battery connector?

Airsoft Guns Discussion