IASUS IA4 UHF radio

Ryan_Coke · June 16th, 2010, 21:37

I just bought one of these radios and although the quality seems to be good the support and manual for it are terrible. It almost seems that the person printing the manual must have been foreign and tried to print it out in english. There seems to be a few errors in it. BUT if someone that has this radio and knows how to enter the "SELF" programming mode could explain to me how to do it I would be greatly appreciative. In the manual it says to hold down the CALL button (which to me is on the side and just below the PTT button) AND the MENU button at the same time while turning it on should display the "SELF" screen a couple seconds after turning it on. Well it doesn't do this ofr me and I wonder if someone was successful. Thanks all!

Ryan_Coke · June 17th, 2010, 17:00

No one has this radio?

Zeonprime · June 17th, 2010, 18:36

you might want to have this in the "Doctor's Corner" as you are asking for help, plus a title change may get you more hits.

Ryan_Coke · June 18th, 2010, 04:21

Will do, thx!

martin2112 · July 6th, 2010, 13:41

I have a Puxing PX-888, but I think this could help...

The Self-programming mode is used when connected to a PC via cable, right?

On my radio - same key combo, BTW - even if the manual says so, there is no display on the LCD upon entering that mode.

To make matters worse, even if the radio is in self-programming mode, the software won't recognize the radio until I configure the software for the proper COM port, every time I run the application. This makes the user believe the radio is not in the self-prog mode, re-enforced by the absence of LCD message.

So that's two things to check. Good luck.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

June 16th, 2010, 21:37	#1
Ryan_Coke Trader rating Join Date: Jun 2010	IASUS IA4 UHF radio I just bought one of these radios and although the quality seems to be good the support and manual for it are terrible. It almost seems that the person printing the manual must have been foreign and tried to print it out in english. There seems to be a few errors in it. BUT if someone that has this radio and knows how to enter the "SELF" programming mode could explain to me how to do it I would be greatly appreciative. In the manual it says to hold down the CALL button (which to me is on the side and just below the PTT button) AND the MENU button at the same time while turning it on should display the "SELF" screen a couple seconds after turning it on. Well it doesn't do this ofr me and I wonder if someone was successful. Thanks all!

July 6th, 2010, 13:41	#5
martin2112 a.k.a martind2112 Trader rating Join Date: Apr 2010 Location: St-Philippe (Rive-Sud de Montréal), Québec, Canada	I have a Puxing PX-888, but I think this could help... The Self-programming mode is used when connected to a PC via cable, right? On my radio - same key combo, BTW - even if the manual says so, there is no display on the LCD upon entering that mode. To make matters worse, even if the radio is in self-programming mode, the software won't recognize the radio until I configure the software for the proper COM port, every time I run the application. This makes the user believe the radio is not in the self-prog mode, re-enforced by the absence of LCD message. So that's two things to check. Good luck. __________________ G&G G4 CQB-R, KWA M1911A1, Army R17 Glock, KSC USP .45 Tactical

June 17th, 2010, 17:00	#2
Ryan_Coke Trader rating Join Date: Jun 2010	No one has this radio?

June 18th, 2010, 04:21	#4
Ryan_Coke Trader rating Join Date: Jun 2010	Will do, thx!

IASUS IA4 UHF radio

Gear Discussion