WE Scar OPEN BOLT!!!!

Riko · December 15th, 2010, 11:43

eind this year, begin next year SAYS we...
http://ggitv.blip.tv here is a whole film where he answers questions, dunno where he said it, but its in there, to lazy to look it up again for you...but he SAID end this year - begin next year!

Ross · December 15th, 2010, 13:27

So for a hundred dollars or something, we could replace the internals with an open bolt system? Would the gun's upper receiver shell be any different? Would the bolt carrier need to be replaced?

Riko · December 15th, 2010, 13:43

hmmm, logically thinking the bolt itself will be different of course, since its no longer of use with the new open bolt design. The brass tube will disappear thus leaving room for a open bolt design like in the G39.
The bolt carrier, dunno about that....could be that they keep it, could be that it will be a different design specific for the bolt.
As long as the Scar doesnt lose its distinctive *KLING* sound, its good for me

Its all assumption

About the barrel and hop up.
Imo, it should be possible to change the big metal block that holds the barrel without changing the whole upper receiver.
Something like the design of the G36, but molded a bit different to fit the Scars upper receiver.

Can't wait for this kit to come out, so I can put a long 6.01mm inner barrel in it, like I did with my G39, so it will shoot hard

Greydingoe · January 26th, 2011, 22:26

Check out airsoftbuddy.com, they have the we scar open bolt and open bolt kit now. Only $70

Ross · January 27th, 2011, 00:31

OMG OMG OMG

ra-tech too

http://en.ratech.com.tw/product/html...at_g_we037.php

Does anyone know what kind of inner barrel this system can take? I need a long one.

Ninja_En_Short · January 27th, 2011, 03:27

New gas mag leaky because of shipping ?
What a bunch of asses, every engineer know that their ridiculous seals won't hold anything in.
As for the G36 I sent them pictures of mine after my catastrophic failure they still haven't called...

It still far from perfect.

Riko · January 27th, 2011, 05:30

Quote:

Originally Posted by Ross

OMG OMG OMG

ra-tech too

http://en.ratech.com.tw/product/html...at_g_we037.php

Does anyone know what kind of inner barrel this system can take? I need a long one.

Mail erica from ratech and you will know....

Ross · January 27th, 2011, 12:35

I did yesterday. Still no reply. They have a lot of long barrels for stuff like their m14. You would think that would fit no problem. I guess it depends on where the pin notches are. Are you getting the open bolt kit, riko?

Riko · January 27th, 2011, 13:20

I will definitely get the open bolt system with a long inner barrel to get as much fps as I can!

Preferably a 505mm Ratech 6.01 precision inner barrel that I already have installed in my G39....

And I would assume the open bolt scar also takes those type of inner barrel.
But I will await your answer when Erica replies

Sim123456 · January 27th, 2011, 14:30

You can place the 540mm 6.01 Ra-Tech M14 in it. I would do that

Riko · January 27th, 2011, 14:40

I would too, but I need confirmation first from somebody that has the open bolt scar or the open bolt conversion for the scar

Amos · January 27th, 2011, 14:40

Quote:

Originally Posted by Ross

I did yesterday. Still no reply. They have a lot of long barrels for stuff like their m14. You would think that would fit no problem. I guess it depends on where the pin notches are. Are you getting the open bolt kit, riko?

Open bolt guns take the same kind of barrel, hop-up rubber and rumor has it the same nozzle

snipersyntagmatik · January 27th, 2011, 14:41

has anyone gone ahead and ordered the airsoftbuddy or ratech OB drop in kits? which has more favourable reviews?

Riko · January 27th, 2011, 14:57

Quote:

Originally Posted by snipersyntagmatik

has anyone gone ahead and ordered the airsoftbuddy or ratech OB drop in kits? which has more favourable reviews?

the open bolt conversion kit is from WE.....doesnt matter wich store you buy it from, the kit itself is the same.

mr_nuts31 · January 27th, 2011, 19:58

I'm thinking of getting one if i can find a broken scar since it comes with a spare trigger box and could fix all of the problem with the WE scar. Only thing though is if the open bolt mags for it are still good with the pdw since im going open bolt with it as well

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 15th, 2010, 11:43	#16
Riko Trader rating Join Date: Aug 2010 Location: Belgium	eind this year, begin next year SAYS we... http://ggitv.blip.tv here is a whole film where he answers questions, dunno where he said it, but its in there, to lazy to look it up again for you...but he SAID end this year - begin next year! __________________ Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249

December 15th, 2010, 13:43	#18
Riko Trader rating Join Date: Aug 2010 Location: Belgium	hmmm, logically thinking the bolt itself will be different of course, since its no longer of use with the new open bolt design. The brass tube will disappear thus leaving room for a open bolt design like in the G39. The bolt carrier, dunno about that....could be that they keep it, could be that it will be a different design specific for the bolt. As long as the Scar doesnt lose its distinctive KLING sound, its good for me Its all assumption About the barrel and hop up. Imo, it should be possible to change the big metal block that holds the barrel without changing the whole upper receiver. Something like the design of the G36, but molded a bit different to fit the Scars upper receiver. Can't wait for this kit to come out, so I can put a long 6.01mm inner barrel in it, like I did with my G39, so it will shoot hard __________________ Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249 Last edited by Riko; December 15th, 2010 at 18:19..

January 27th, 2011, 00:31	#20
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	OMG OMG OMG ra-tech too http://en.ratech.com.tw/product/html...at_g_we037.php Does anyone know what kind of inner barrel this system can take? I need a long one. Last edited by Ross; January 27th, 2011 at 01:14..

December 15th, 2010, 13:27	#17
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	So for a hundred dollars or something, we could replace the internals with an open bolt system? Would the gun's upper receiver shell be any different? Would the bolt carrier need to be replaced?

January 26th, 2011, 22:26	#19
Greydingoe Trader rating Join Date: Jul 2009 Location: Calgary	Check out airsoftbuddy.com, they have the we scar open bolt and open bolt kit now. Only $70

January 27th, 2011, 03:27	#21
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	New gas mag leaky because of shipping ? What a bunch of asses, every engineer know that their ridiculous seals won't hold anything in. As for the G36 I sent them pictures of mine after my catastrophic failure they still haven't called... It still far from perfect. __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)

January 27th, 2011, 12:35	#23
Ross Trader rating Join Date: Nov 2009 Location: Winnipeg	I did yesterday. Still no reply. They have a lot of long barrels for stuff like their m14. You would think that would fit no problem. I guess it depends on where the pin notches are. Are you getting the open bolt kit, riko?

January 27th, 2011, 13:20	#24
Riko Trader rating Join Date: Aug 2010 Location: Belgium	I will definitely get the open bolt system with a long inner barrel to get as much fps as I can! Preferably a 505mm Ratech 6.01 precision inner barrel that I already have installed in my G39.... And I would assume the open bolt scar also takes those type of inner barrel. But I will await your answer when Erica replies __________________ Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249

January 27th, 2011, 14:30	#25
Sim123456 Trader rating Join Date: Oct 2008 Location: Laval	You can place the 540mm 6.01 Ra-Tech M14 in it. I would do that

January 27th, 2011, 14:40	#26
Riko Trader rating Join Date: Aug 2010 Location: Belgium	I would too, but I need confirmation first from somebody that has the open bolt scar or the open bolt conversion for the scar __________________ Signature images can not exceed 510 x 100 pixels. See this thread for more details: http://www.airsoftcanada.com/showthread.php?t=53249

January 27th, 2011, 14:41	#28
snipersyntagmatik Trader rating Join Date: Jun 2010 Location: Mississauga, ON	has anyone gone ahead and ordered the airsoftbuddy or ratech OB drop in kits? which has more favourable reviews? __________________ SNIPERSYN \| Primus Inter Pares A$$WATER SERVICES LLC \| Si Vis Pacem, Para Bellum

January 27th, 2011, 19:58	#30
mr_nuts31 Trader rating Join Date: Aug 2009 Location: Petawawa, ON	I'm thinking of getting one if i can find a broken scar since it comes with a spare trigger box and could fix all of the problem with the WE scar. Only thing though is if the open bolt mags for it are still good with the pdw since im going open bolt with it as well

WE Scar OPEN BOLT!!!!

Airsoft Guns Discussion