Looking to make the most powerful KSC G26, HELP.....

MikeMcNair · July 8th, 2009, 11:13

well, i have been bored since i cant plink around with this thing, so i polished the barrel, i kinda like it

here it is compared to the G26C non polished.........

also, i ordered a new gun, if nothign more, to compare the inner workings to see what is wrong with mine. i fully disassembled mine, and cannot ffigure out what the issue it. i even cleaned EVERY part, and relubed the snot out of it with silicone, and no dice. so, i guess i will have to compare it side to side with a known working version.

MikeMcNair · July 13th, 2009, 15:28

well, i ordered a WHOLE NEW GUN which arived today, lets see if i can make all my mods work on it, and find out what is wrong with the previous one.

this is driving me NUTS!!!!

MikeMcNair · July 17th, 2009, 12:31

here is a vid of the issues...........

YouTube - KSC G26 Shooting with issues

MikeMcNair · July 21st, 2009, 11:04

bump for more views of video and suggestions please.

Jimski · July 21st, 2009, 11:31

hey Mike

Would it be that you're not getting enough recoil power, hence the double feed and no semi auto action?
this could be due to the first spring you installed.
I also had this exact same behaviour when I tried to craft a hop-up rubber from a TM one, and I believe it's because a lot of gas was lost in the shot.

As I understand it, a stiffer hammer spring is going to have an influence on the valve opening duration, you're getting more gas out in the first fraction of second, when the hammer actually hits the valve button.
I could be completely wrong.

MikeMcNair · July 22nd, 2009, 10:02

i actually just put in a factory (uncompany "enhanced" ) recoil spring, and no difference.

i also put in a Guarder enhanced hammer spring (which i have in my "good" gun, and still no difference.

Jimski · July 28th, 2009, 22:36

hey, I just had same problem tonight with a long magazine from a g26c.
I fixed it by using the plastic outer barrel from the g26c instead of the metal one, it stopped doing that.

MikeMcNair · July 29th, 2009, 09:48

thanks for the tip, i am 100% sure it is in the firing mechanism. i am dumb, and bought a WHOLE NEW GUN, put my modded slide and mag in it, and viola! everything is fine. so it must be hammer/striker related.

once i find a free moment i will fix it. i have the other one for sale here......

http://www.airsoftforum.com/board/FS...l&pid=18083243

MikeMcNair · July 31st, 2009, 13:24

finally got rid of the white trade marks that were making me hate the gun, since it looked unlike the real steel.........

old pic, next to the real steel.......

lemegacool · July 31st, 2009, 13:28

now you just need a coat of dullcote on the slide to have the same finish as rs, and for your problems... could it be sear-related... i have a tm clone glock with the same symptoms and the cause is a worn hammer sear...

MikeMcNair · July 31st, 2009, 13:43

dullcoat? where does one get that??????? sounds lilke a good idea!!

as for the sear, it is BRAND new. i too thought it was that, so i replaced it, not happy gun yet

Jimski · July 31st, 2009, 14:10

Quote:

Originally Posted by MikeMcNair

thanks for the tip, i am 100% sure it is in the firing mechanism. i am dumb, and bought a WHOLE NEW GUN,

I did the same thing

it's the only way to have all the parts...

dullcoat or flat black: spray can in hobby stores or at Home De Pot.

MikeMcNair · July 31st, 2009, 14:42

i am totally going to the store to look for dullcoat, that sounds like an awesome idea!!!

Jimski · July 31st, 2009, 15:04

be sure to wait 48h between two coats.
(if you don't it will wrinkle)
sand ( 600 to 1000 ) between each coat, not too much, just enough to smooth it a bit.

MikeMcNair · August 3rd, 2009, 11:34

i did the dull coat, and didnt see your post about waiting

i am likely gonna sand it down a bit and redo, cause it looks like crap. the sides are perfect, but the top looks like wrinkly.

also, when prepping it for paint, i cleaned it, and it took the black crayon out of the letters!!! i hate the white letters!!!!!!!!!! aaaaaaaaaaaaaaaaaaaahhhhhhhhhh!!!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 21st, 2009, 11:31	#155
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	hey Mike Would it be that you're not getting enough recoil power, hence the double feed and no semi auto action? this could be due to the first spring you installed. I also had this exact same behaviour when I tried to craft a hop-up rubber from a TM one, and I believe it's because a lot of gas was lost in the shot. As I understand it, a stiffer hammer spring is going to have an influence on the valve opening duration, you're getting more gas out in the first fraction of second, when the hammer actually hits the valve button. I could be completely wrong. __________________ Last edited by Jimski; July 21st, 2009 at 11:37..

July 28th, 2009, 22:36	#157
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	hey, I just had same problem tonight with a long magazine from a g26c. I fixed it by using the plastic outer barrel from the g26c instead of the metal one, it stopped doing that. __________________

July 31st, 2009, 13:28	#160
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	now you just need a coat of dullcote on the slide to have the same finish as rs, and for your problems... could it be sear-related... i have a tm clone glock with the same symptoms and the cause is a worn hammer sear... __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry

July 8th, 2009, 11:13	#151
MikeMcNair Trader rating Join Date: May 2009 Location: PA	well, i have been bored since i cant plink around with this thing, so i polished the barrel, i kinda like it here it is compared to the G26C non polished......... also, i ordered a new gun, if nothign more, to compare the inner workings to see what is wrong with mine. i fully disassembled mine, and cannot ffigure out what the issue it. i even cleaned EVERY part, and relubed the snot out of it with silicone, and no dice. so, i guess i will have to compare it side to side with a known working version.

July 13th, 2009, 15:28	#152
MikeMcNair Trader rating Join Date: May 2009 Location: PA	well, i ordered a WHOLE NEW GUN which arived today, lets see if i can make all my mods work on it, and find out what is wrong with the previous one. this is driving me NUTS!!!!

July 17th, 2009, 12:31	#153
MikeMcNair Trader rating Join Date: May 2009 Location: PA	here is a vid of the issues........... YouTube - KSC G26 Shooting with issues

July 21st, 2009, 11:04	#154
MikeMcNair Trader rating Join Date: May 2009 Location: PA	bump for more views of video and suggestions please.

July 22nd, 2009, 10:02	#156
MikeMcNair Trader rating Join Date: May 2009 Location: PA	i actually just put in a factory (uncompany "enhanced" ) recoil spring, and no difference. i also put in a Guarder enhanced hammer spring (which i have in my "good" gun, and still no difference.

July 29th, 2009, 09:48	#158
MikeMcNair Trader rating Join Date: May 2009 Location: PA	thanks for the tip, i am 100% sure it is in the firing mechanism. i am dumb, and bought a WHOLE NEW GUN, put my modded slide and mag in it, and viola! everything is fine. so it must be hammer/striker related. once i find a free moment i will fix it. i have the other one for sale here...... http://www.airsoftforum.com/board/FS...l&pid=18083243

July 31st, 2009, 13:24	#159
MikeMcNair Trader rating Join Date: May 2009 Location: PA	finally got rid of the white trade marks that were making me hate the gun, since it looked unlike the real steel......... old pic, next to the real steel.......

July 31st, 2009, 13:43	#161
MikeMcNair Trader rating Join Date: May 2009 Location: PA	dullcoat? where does one get that??????? sounds lilke a good idea!! as for the sear, it is BRAND new. i too thought it was that, so i replaced it, not happy gun yet

July 31st, 2009, 14:42	#163
MikeMcNair Trader rating Join Date: May 2009 Location: PA	i am totally going to the store to look for dullcoat, that sounds like an awesome idea!!!

July 31st, 2009, 15:04	#164
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	be sure to wait 48h between two coats. (if you don't it will wrinkle) sand ( 600 to 1000 ) between each coat, not too much, just enough to smooth it a bit. __________________

August 3rd, 2009, 11:34	#165
MikeMcNair Trader rating Join Date: May 2009 Location: PA	i did the dull coat, and didnt see your post about waiting i am likely gonna sand it down a bit and redo, cause it looks like crap. the sides are perfect, but the top looks like wrinkly. also, when prepping it for paint, i cleaned it, and it took the black crayon out of the letters!!! i hate the white letters!!!!!!!!!! aaaaaaaaaaaaaaaaaaaahhhhhhhhhh!!!

Looking to make the most powerful KSC G26, HELP.....

Upgrades & Modifications