Baker_Jeff's Lee Enfield No.4 MK1 Project

baker_Jeff · January 29th, 2009, 17:37

Here is the project thread for my Enfield. It is to compliment my WW2 Canadian Infantry kit.

My 1/6 scale reference gun:

The donor gun:

Shell ejecting! Don't know how I'm going to make it work... due to the mag placement, will have to use a dummy Enfield mag.

The removed receiver:

The wood pieces and the rest:

I have the trigger guard and screws, the bands to hold the wood together, front and rear sling swivels, and rear flip up sight on the way from Ebay. The guy will be about 90% real steel.

The wood is going to be pretty much hollowed out to fit the Super9 rifle parts inside.

Will keep the updates coming!

hattrick · January 29th, 2009, 17:52

Cool stuff, funny you decided to use a super9 instead of a vsr or somthing more reputable......

baker_Jeff · January 29th, 2009, 18:01

Quote:

Originally Posted by hattrick

Cool stuff, funny you decided to use a super9 instead of a vsr or somthing more reputable......

Using it cause it's super cheap, and I need to hack and cut to fit it... don't want to ruin an expensive gun. The first attempt is just a test. If this works out, I'll be doing another one with quality parts.

Disco_Dante · January 29th, 2009, 18:02

I'm excited to see how this turns out.

THEDRAVEN · January 29th, 2009, 18:12

looks cool but if i were you i would build it off a AGM m14 if you are looking for the cheep way

baker_Jeff · January 29th, 2009, 18:17

Unless this M14 is bolt action, I'm afraid I wouldn't consider it :P

Old School Punk · January 29th, 2009, 19:08

Hey Jeff; That is a cool project, can't wait to see her when she's done!

I got a buddy that restores real Enfield Riflles from WW2. If you ever need some refernce material, I am sure that he can help you out.

Gordo

P.S. It was nice meeting you in person last weekend, hopefully we will get to shoot each other some day!

baker_Jeff · January 29th, 2009, 19:38

Quote:

Originally Posted by Old School Punk

I got a buddy that restores real Enfield Riflles from WW2. If you ever need some refernce material, I am sure that he can help you out.

Thanks Gord, that would be great! I need some small pieces too. Perhaps shoot me a PM with some more info? It was good to meet you too, I will see you on the field this spring

.

Jeff

baker_Jeff · January 31st, 2009, 11:48

Updates!

I had to cut/trim alot of the plastic surrounding the receiver:

The band that holds the wood stock to the front end is part of the real steel receiver (illegal to buy without a PAL) so I am using parts of the original gun to fabricate it and hold it together.

Have to hollow out almost all of the original wood in order for the new parts to fit:

Still have awhile to go!

View from the top, it's a tight freakin fit.

Will cut or bend the bolt to replicate the sharp angle of the Enfield bolt.

Amos · January 31st, 2009, 12:04

I've got a spare marui receiver, trigger, cylinder and bolt if you want to make this out of a reliable gun...

baker_Jeff · January 31st, 2009, 12:09

Sure shoot me a PM with price please!

Crunchmeister · January 31st, 2009, 12:35

This should be quite interesting. I'm keeping an eye on this thread. I want to see how this turns out. Good work so far.

rustysniper · January 31st, 2009, 12:51

Hey, I saw this done using a VSR 10....finished product looked pretty good although the angle f the stock at the grip looked a bit odd. The builder did not use any Enfield parts but fabricated all by hand.
Anyway....good luck

baker_Jeff · February 2nd, 2009, 20:57

OMG UPDATES!?

Getting pretty close to fitting! I see some trigger peeking out the bottom now

.

Could pretty much be a canoe it is hollowed out so much.

New parts in the mail today:

Only a few parts of my kit:

baker_Jeff · February 4th, 2009, 19:56

OMG Updates!!!

Front end finished. Please excuse the inner barrel sticking out, just need to tuck it back in.

Finally received the trigger guard today. Next up is to fabricate a new trigger, and modify the bolt to replicate the right parts.

Here's how she looks so far, almost done!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 29th, 2009, 17:37	#1
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	Baker_Jeff's Lee Enfield No.4 MK1 Project Here is the project thread for my Enfield. It is to compliment my WW2 Canadian Infantry kit. My 1/6 scale reference gun: The donor gun: Shell ejecting! Don't know how I'm going to make it work... due to the mag placement, will have to use a dummy Enfield mag. The removed receiver: The wood pieces and the rest: I have the trigger guard and screws, the bands to hold the wood together, front and rear sling swivels, and rear flip up sight on the way from Ebay. The guy will be about 90% real steel. The wood is going to be pretty much hollowed out to fit the Super9 rifle parts inside. Will keep the updates coming! __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

January 29th, 2009, 18:02	#4
Disco_Dante Trader rating Join Date: Oct 2007 Location: GTA	I'm excited to see how this turns out. __________________ Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life.

January 29th, 2009, 18:12	#5
THEDRAVEN Trader rating Join Date: Mar 2005 Location: winnipeg canada	looks cool but if i were you i would build it off a AGM m14 if you are looking for the cheep way __________________

January 29th, 2009, 18:17	#6
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	Unless this M14 is bolt action, I'm afraid I wouldn't consider it :P __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

January 29th, 2009, 19:08	#7
Old School Punk Trader rating Join Date: Sep 2008 Location: Edmonton, Alberta	Hey Jeff; That is a cool project, can't wait to see her when she's done! I got a buddy that restores real Enfield Riflles from WW2. If you ever need some refernce material, I am sure that he can help you out. Gordo P.S. It was nice meeting you in person last weekend, hopefully we will get to shoot each other some day! __________________

January 31st, 2009, 11:48	#9
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	Updates! I had to cut/trim alot of the plastic surrounding the receiver: The band that holds the wood stock to the front end is part of the real steel receiver (illegal to buy without a PAL) so I am using parts of the original gun to fabricate it and hold it together. Have to hollow out almost all of the original wood in order for the new parts to fit: Still have awhile to go! View from the top, it's a tight freakin fit. Will cut or bend the bolt to replicate the sharp angle of the Enfield bolt. __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

January 31st, 2009, 12:04	#10
Amos Trader rating Join Date: Aug 2006 Location: Japan	I've got a spare marui receiver, trigger, cylinder and bolt if you want to make this out of a reliable gun... __________________ Custom Builds: FA3674U Krinkov G3SD6

January 31st, 2009, 12:09	#11
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	Sure shoot me a PM with price please! __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

January 31st, 2009, 12:35	#12
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	This should be quite interesting. I'm keeping an eye on this thread. I want to see how this turns out. Good work so far. __________________

January 31st, 2009, 12:51	#13
rustysniper Trader rating Join Date: Apr 2008 Location: Canal Flats BC	Hey, I saw this done using a VSR 10....finished product looked pretty good although the angle f the stock at the grip looked a bit odd. The builder did not use any Enfield parts but fabricated all by hand. Anyway....good luck

February 2nd, 2009, 20:57	#14
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	OMG UPDATES!? Getting pretty close to fitting! I see some trigger peeking out the bottom now . Could pretty much be a canoe it is hollowed out so much. New parts in the mail today: Only a few parts of my kit: __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

February 4th, 2009, 19:56	#15
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	OMG Updates!!! Front end finished. Please excuse the inner barrel sticking out, just need to tuck it back in. Finally received the trigger guard today. Next up is to fabricate a new trigger, and modify the bolt to replicate the right parts. Here's how she looks so far, almost done! __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

Baker_Jeff's Lee Enfield No.4 MK1 Project

Showcase