|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 28th, 2007, 17:11
|
#1 |
|
Largest 8.4v battery in ak(fullstock)
Quick question. Whats the largest mAh 8.4v battery i can fit in a tm ak-47? i have a 3600, but cannot close the buttstock with the battery installed, (ie too big).
|
|
|
|
|
July 5th, 2007, 10:48
|
#2 |
|
mah doesn't matter it is voltage that limits the gun, and you may have to modify the battery compartment to fit ( dremel out).
|
|
|
|
|
July 5th, 2007, 23:17
|
#3 | |
|
If mah doesn't matter then why doesn't his 8.4 (normal voltage) battery fit?
Kerbosa you might have to modify your stock a little bit - I know with my mp5 I had to shave down the inside of the stock and the battery is still a really tight fit. I'm running a 3300 mah battery. -Cheese
__________________
-Cheese Quote:
|
|
|
|
|
|
July 5th, 2007, 23:36
|
#4 |
|
Maybe his pack has larger cells, I think they are usually SC type?
I know larger ones exist and that may be the size problem. |
|
|
|
|
July 5th, 2007, 23:52
|
#5 |
|
the pack fits fine in my mp5. It is an "ace power" rc car pack, and i did have to remove the plastic cap that covers the leads to fit in the mp5. I am wondering if maybe i need to get a pack that uses smaller cells. this pack uses sub-c cells.
http://www.acehobby.com/ace/ni_mh.htm Last edited by Kerbosa; July 5th, 2007 at 23:59.. |
|
|
|
|
|
July 6th, 2007, 00:25
|
#6 | |
|
|
How is it not fitting? Regardless you should be able to mod it to fit - it'll be worth it.
-Cheese
__________________
-Cheese Quote:
|
|
|
|
|
|
July 6th, 2007, 00:52
|
#7 |
|
Sometimes you just gotta jerk your battery of in your stock....seriously.
I crammed an 8.4 4200mah in my MP5 stock, got stuck, pulled like all hell to get it out, put it back in, but it was a little easier that time. Repeat this process until it begins to slide in and out to your liking....it will happen. But that first time you really gotta pack it in tight and push like door-to-door solicitor to get it out. |
|
|
|
|
|
July 6th, 2007, 01:34
|
#8 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
has to do with the cap on the batteries, some have thicker insulation at top and bottom, the 8.4v GP 3000Mah battery fits in anything and its a real good battery, lasted about 4 years so far, still charges to 3000Mah
|
|
|
|
|
July 6th, 2007, 19:30
|
#9 |
|
there is no cap on the battery. the problem is that the cells are too big, and therefore the cap on the buttstock will not close. i guess i will take it to the hobby shop and see if i can get one made with smaller cells.
|
|
|
|
|
|
July 6th, 2007, 21:24
|
#10 | |
|
|
KERBOSA HACK YOUR STOCK! ITS WORTH LESS THAN THE BATTERY!
-Cheese
__________________
-Cheese Quote:
|
|
|
|
|
|
July 6th, 2007, 21:37
|
#11 |
|
you could all ways buy a mag buttstock holder, and place the battery in it
 thats what i did with my m4.
|
|
|
|
|
|
July 7th, 2007, 01:33
|
#12 |
|
Monkey with a Gun
|
check the wiring
hey brother...had same issue with my 3200mah...8.4
I checked wiring...it blocking it at base. make sure fuse is runing up correct section. If not i can bring my dremel to next game for you... Deep
__________________
"Anyone who has the power to make you believe absurdities has the power to make you commit injustices." Voltaire AV for Barrie, Orillia, Innisfil, Bradford Region - pm me if you need AV'd I'm the Barrie Bastard. http://www.bbbastard.com/ Cheese is good. |
|
|
|
|
July 7th, 2007, 10:03
|
#13 |
|
good idea. ill take it off this afternoon and see whats up. didn't think of that. I'm a little hesitant to mod the buttstock. maybe wires are in the way.
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
