TM glock 18c many problems

Snaffu · September 27th, 2015, 14:20

.

daishi · September 27th, 2015, 17:42

Youre using propane in a compressed air gun.....

You need to upgrade the hammer spring and recoil spring/rod...

Read the thread about upgrading your tm glock. Itsliterally the first stickied post in the mods section.

shootersaber · September 28th, 2015, 03:15

Quote:

Originally Posted by Snaffu

When I insert a freshly gassed magazine (green gas) and pull the trigger I hear a dull thunk as if the gas valve on the magazine is being tapped but no gas comes out and no bbs shoot. If I rack the slide a bb will roll out the barrel. Other times I will pull the trigger and it will shoot similar to a Springer once and then won't shoot again. Sometimes it will shoot a few times then it will stop shooting. I've taken the whole thing apart. There are no damaged pieces as the gun is brand new. I reassembled correctly so that's not the issue.

You need to upgrade the hammer spring. The pressure of green gas is bigger than JAPAN 134a gas. You need a harder hammer spring for opening the magazine output valve. Something like this !!!

Hectic · September 28th, 2015, 09:49

Yup hammer spring. Recoil spring (to avoid broken slide quickly). Also would suggest a valve knocker. Either that or grab some duster gas and run it like that.. provided the valve knocker is not broken.

Snaffu · September 29th, 2015, 18:11

.

Snaffu · September 29th, 2015, 18:16

.

Snaffu · September 29th, 2015, 18:17

.

MadMax · October 9th, 2015, 04:01

Does your gun fire properlywith a cold mag (like only a few minutes after filling gas)?

If so, I'd say that your hammer spring is light striking and not fully opening the fire valve. If the gun fires properly with a cool mag, but not with a warm one, that's a pretty strong indication of light striking.

Snaffu · October 10th, 2015, 19:06

.

RainyEyes · October 10th, 2015, 20:24

Quote:

Originally Posted by Snaffu

Attached is a picture of some... Leftovers... Any idea where they're from?

Are you really asking people to play detective with your big foot sighting quality photo? Even if people knew they wouldn't be able to help.

Also, there should be no left over parts when you're replacing things, especially when they're originally from the stock gun. Those are probably part of the hammer assembly or whatever resets the hammer.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 27th, 2015, 14:20	#1
Snaffu Trader rating Join Date: Jun 2012	TM glock 18c many problems . Last edited by Snaffu; October 11th, 2015 at 10:51..

September 29th, 2015, 18:11	#5
Snaffu Trader rating Join Date: Jun 2012	. Last edited by Snaffu; October 11th, 2015 at 10:52..

September 29th, 2015, 18:16	#6
Snaffu Trader rating Join Date: Jun 2012	. Last edited by Snaffu; October 11th, 2015 at 10:52..

September 29th, 2015, 18:17	#7
Snaffu Trader rating Join Date: Jun 2012	. Last edited by Snaffu; October 11th, 2015 at 10:53..

October 9th, 2015, 04:01	#8
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	Does your gun fire properlywith a cold mag (like only a few minutes after filling gas)? If so, I'd say that your hammer spring is light striking and not fully opening the fire valve. If the gun fires properly with a cool mag, but not with a warm one, that's a pretty strong indication of light striking. __________________ Want nearly free GBB gas?

October 10th, 2015, 19:06	#9
Snaffu Trader rating Join Date: Jun 2012	. Last edited by Snaffu; October 11th, 2015 at 10:54..

TM glock 18c many problems

Doctor's Corner