Compression problems with air nozzle on shaft

Jeffleon · April 26th, 2009, 23:16

Hey guys well i have an air leak whenever i put the air nozzle on on the cylinder head shaft. the compression is fine when i just plug the cylinder shaft with my finger but when i attach the air nozzle it leaks. ive tried silicone grease and it worked for like the first 2 shots and then it leaked again. Would a Nozzle with an O-ring inside (specifically the guarder air nozzles) fix this leak combined with the silicon grease?

shifty51 · April 26th, 2009, 23:19

What aeg is this on? some aegs have known bad nozzles (the aug for example)

m102404 · April 27th, 2009, 07:13

There's not much you can do there. If it's a slow, minor leak it's fine. If it's really bad there's no option but to switch out to a different nozzle.

If several different nozzles don't work, you may consider switching the cylinder head.

If there is an oring in there, you can try to pick it out and re-lube it. But any improvements will probably be temporary.

Best of luck,

Tys

Jeffleon · April 27th, 2009, 19:22

the AEG is a TM m4, The nozzle doesnt have an o-ring which i think is the cause of the leak.

m102404 · April 27th, 2009, 19:37

The nozzle goes back and forth with every shot....it's going to wear.

Try a Modify M4 airseal nozzle...it should work fine.

Tys

Jeffleon · April 27th, 2009, 22:10

ok cool ima try to get one soon, thanks.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 26th, 2009, 23:16	#1
Jeffleon Trader rating Join Date: Jan 2009	Compression problems with air nozzle on shaft Hey guys well i have an air leak whenever i put the air nozzle on on the cylinder head shaft. the compression is fine when i just plug the cylinder shaft with my finger but when i attach the air nozzle it leaks. ive tried silicone grease and it worked for like the first 2 shots and then it leaked again. Would a Nozzle with an O-ring inside (specifically the guarder air nozzles) fix this leak combined with the silicon grease?

April 26th, 2009, 23:19	#2
shifty51 Trader rating Join Date: Jan 2007 Location: Mississauga, Ontario	What aeg is this on? some aegs have known bad nozzles (the aug for example) __________________

April 27th, 2009, 07:13	#3
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	There's not much you can do there. If it's a slow, minor leak it's fine. If it's really bad there's no option but to switch out to a different nozzle. If several different nozzles don't work, you may consider switching the cylinder head. If there is an oring in there, you can try to pick it out and re-lube it. But any improvements will probably be temporary. Best of luck, Tys

April 27th, 2009, 19:22	#4
Jeffleon Trader rating Join Date: Jan 2009	the AEG is a TM m4, The nozzle doesnt have an o-ring which i think is the cause of the leak.

April 27th, 2009, 19:37	#5
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	The nozzle goes back and forth with every shot....it's going to wear. Try a Modify M4 airseal nozzle...it should work fine. Tys

April 27th, 2009, 22:10	#6
Jeffleon Trader rating Join Date: Jan 2009	ok cool ima try to get one soon, thanks.

Compression problems with air nozzle on shaft

Doctor's Corner