|
1) Manufacturer, Model Name
G&P M249 ranger
2) Date Obtained
March 2007
3) Initial Cost
1800 CA
4) New or Used
New
5) Mechanical Problems
the mechanism that makes the cocking sound when u cock the gunto load (audio effect only), the spring popped and disappeared when lending it for another player....still attempting to fix it
6) Esthetic Problems
Bipod was installed backwards i assume, because i couldnt lock the bipod properly when deployed.
7) Rounds fired between failures
just below 10,000 and so far hasnt fail
8) Changes to Internals and Externals
None
9) Resale Date and Value if applicable.
N/A
10)Notes and Comments (Optional)
Rate of Fire exceeds the same models from TOP that i have seen.
1) Manufacturer, Model Name
- Redwolf custom SL-8
2) Date Obtained
-March 2006
3) Initial Cost
-1800 with internal upgrades
4) New or Used
-New
5) Mechanical Problems (Gearbox issues, hopup issues.. basically functional performance related -- supply date of
issue)
-
6) Esthetic Problems (Paint damage, cracks in body, loose parts.. physical construction related -- supply date of
issue)
-Loose fire selector, Feb 2007
7) Rounds fired between failures (think how many bags of BB's used before it failed. If no failure, list rounds fired
up to this point)
-At least 20 games worth of BBs fired semi-automatically
8) Changes to Internals and Externals (upgrades, mods, dates)
Real SL-8 carrying handle installed
- Standard Redwolf Level 4 Upgrade when purchased.
1. Install Prometheus spring
2. Systema Bearing middle gear
3. Systema Steel bushings
4. Systema Hi Torque gears
5. Battery Compartment Mods
6. Systema Directional Piston Head
7. Systema Bearing Rear Spring Guide
8. Install Deep Fire Titanium Piston (Titanium Teeth)
9. Fuse removal
9) Resale Date and Value if applicable.
-
10)Notes and Comments (Optional)
Almost the entire rifle is constructed by ABS
1) Manufacturer, Model Name
G&P SPR with G&P M203 long
2) Date Obtained
August 2005
3) Initial Cost
1000 CA with scope, without M203
4) New or Used
New
5) Mechanical Problems
Piston broke and fixed once
6) Esthetic Problems
Stock wobbles very slightly
7) Rounds fired between failures
3 bags or so
8) Changes to Internals and Externals
New piston
9) Resale Date and Value if applicable.
N/A
10)Notes and Comments (Optional)
1) Manufacturer, Model Name
G&G GR16-R2
2) Date Obtained
November 2006
3) Initial Cost
630 CA
4) New or Used
New
5) Mechanical Problems
Hop up failure
6) Esthetic Problems
the front sling ring swings free causing loud noise
7) Rounds fired between failures
Recieved with Hop up problem
8) Changes to Internals and Externals
new hop up system installed
9) Resale Date and Value if applicable.
N/A
10)Notes and Comments (Optional)
1) Manufacturer, Model Name
Tanaka M700 AICS
2) Date Obtained
August 2006
3) Initial Cost
800 CA
4) New or Used
New
5) Mechanical Problems
Inconsistancy in the trejectury of BBs, possibly caused by the inconsistancy in the gas output or BBs heavier than .36s are needed
6) Esthetic Problems
7) Rounds fired between failures
100
8) Changes to Internals and Externals
Not yet
9) Resale Date and Value if applicable.
N/A
10)Notes and Comments (Optional)
1) Manufacturer, Model Name
TM G36 with Star AG36
2) Date Obtained
October 2006
3) Initial Cost
1150 CA including AG36
4) New or Used
New
5) Mechanical Problems
N/A so far
6) Esthetic Problems
The right side of the fire selector of AG36 is broken. G36 shows signs of loose fire selector as well.
7) Rounds fired between failures
around 2000 rounds
8) Changes to Internals and Externals
Longer Inner outer barrel, G&P metal G36 carrying handle with 3.5x scope and rail on the top
9) Resale Date and Value if applicable.
N/A
10)Notes and Comments (Optional)
Last edited by blueblaster; April 24th, 2007 at 19:39..
|