[yanhchan]

Originally Posted by techobo

Sorry to dig this one up, but I figured I would post here instead of making a new thread.

I have a CA M15A4 Carbine and it is not firing. I have used two different batteries and on both semi and full auto there is not even a sound coming from the gun. The last time it worked was this afternoon. I put in a battery and pulled the trigger to make sure everything was ok. It dry fired and there was a bit of a delay from the trigger pull to the noise. I pulled it again, there was a longer delay, then the noise. On the third shot I heard the motor trying to cycle but there was no dry fire. I first thought the battery was dead so I put in a new one. Nothing. No sounds. So I charged both batteries and tried again. Again, no dry fire.

The last few games I had gone to I had noticed that there was some lag between the trigger pull and the bb's ejection. People have commented that it was my battery, but I have 3 batteries and they all preform the same. The last game I went to I was getting a lot of jams. I was using semi exclusively and every once and a while a trigger pull would have no shot. So I would switch it to full auto and after a while, bbs would be coming out again. I would switch back to semi and everything would be fine.

I should also note I have never opened the gun, and it has only been used about 6 times.

Any ideas?

What kinda of voltage is your battery? 7.2V or 8.4V or 9.2V? I noticed that my 7.2V takes a lot of time before it will cycle as opposed to my 8.4