Airsoft Canada - View Single Post

Kingpin665 · January 2nd, 2007, 19:42

I double and tripple checked the placement of everything, the timing of the gears was off last time but I don't think that would blow a fuse. The Shimmings I didn't really touch (by that I mean I didn't add or remove anything that wasn't already in place from Johnny Do and it worked great when I got it back from him), or really any of the parts other then the spring and piston (and spring guide of course) but everything moved smothly and was well greased before I put the spring in and did my best not to disturb any of it. Put it back together and I guess I'll just have to test it again when I get a new fuse... maybe it was just a fluke *shrugs*

*Edit* My brother told me he could probably find the fuse I needed at work, what he gave me was apparently intended to be used for a bus but had the same "15A" engraved into it (along with some things before the 15 if it matters?). I put it in and it seemed to work fine, the gun itself sounds like its got a higher pitch squeel to it from what it had before the spring I put in, I'm assuming thats normal due to the extra power it takes to compess the spring? The fuse he gave me also doesn't have transparent glass but this wierd opaque stuff, and its about a MM longer, anyone see a problem in using it?

January 2nd, 2007, 19:42	#10
Kingpin665 Trader rating Join Date: Jul 2006 Location: Brantford, ON	I double and tripple checked the placement of everything, the timing of the gears was off last time but I don't think that would blow a fuse. The Shimmings I didn't really touch (by that I mean I didn't add or remove anything that wasn't already in place from Johnny Do and it worked great when I got it back from him), or really any of the parts other then the spring and piston (and spring guide of course) but everything moved smothly and was well greased before I put the spring in and did my best not to disturb any of it. Put it back together and I guess I'll just have to test it again when I get a new fuse... maybe it was just a fluke shrugs Edit My brother told me he could probably find the fuse I needed at work, what he gave me was apparently intended to be used for a bus but had the same "15A" engraved into it (along with some things before the 15 if it matters?). I put it in and it seemed to work fine, the gun itself sounds like its got a higher pitch squeel to it from what it had before the spring I put in, I'm assuming thats normal due to the extra power it takes to compess the spring? The fuse he gave me also doesn't have transparent glass but this wierd opaque stuff, and its about a MM longer, anyone see a problem in using it? __________________ If Rambo was a Ninja we'd have world peace. Last edited by Kingpin665; January 3rd, 2007 at 08:23..