Airsoft Canada - View Single Post

Myrrlyn · May 2nd, 2006, 09:34

Thanks. I went ahead and did a teardown myself and I didnt find it that complicated. Anyone doing a teardown should be told to do it with a large open space, I found some springs and lock washers on my bench.

One thing I noticed was a tendancy for the auto/semi selector switch to slip down on occasion. I fixed this by removing the switch and placing a rubber washer underneath and putting the switch back on. Stiff but compliant at the same time.

Also, one of the butt stock tabs was broken off when I recieved it (no blame) and I was wondering about the best way to fix it would be. It doesnt seem to affect the rifle at all (as I took it out with the tab off), but I would like to repair it if possible.

May 2nd, 2006, 09:34	#3
Myrrlyn Trader rating Join Date: Apr 2006 Location: Moose Jaw, Saskatchewan	Thanks. I went ahead and did a teardown myself and I didnt find it that complicated. Anyone doing a teardown should be told to do it with a large open space, I found some springs and lock washers on my bench. One thing I noticed was a tendancy for the auto/semi selector switch to slip down on occasion. I fixed this by removing the switch and placing a rubber washer underneath and putting the switch back on. Stiff but compliant at the same time. Also, one of the butt stock tabs was broken off when I recieved it (no blame) and I was wondering about the best way to fix it would be. It doesnt seem to affect the rifle at all (as I took it out with the tab off), but I would like to repair it if possible.