|
Need enough to keep things running smooth and lubed, without huge piles of liquid grease getting everywhere. Worst place to get grease going (aside from into the cylinder if it has the chance and blowing out onto the hop up and barrel) is on the contacts, reduces and eventually can cause lack of current flow, making your gun stop shooting. Might be a tad too much in this gun, but once I get it all back together again, there will be less in the box and more on the rag.
Edit: Ok, there IS too much in this, just found a BB sized glob under the sector gear. Having it on the gears like that is ok, but having large globs elsewhere isn't. Add in too much on the piston too!!!
EDIT Again: Found the little block right behind the trigger contact block (keeps the block from moving too far back) has broken off as well. Noticed this in Apoc's G&P SPR, thought it to not be much of a problem, until his gun jammed up. In this case it doesn't seem like it'll cause too many problems, but in the SPR, it's a lot stronger spring, ended up angling the block upwards and it jammed on the bottom of the tappet plate.
|