Airsoft Canada - View Single Post

Ricochet · September 14th, 2016, 10:40

If your hop/inner barrel assembly are steady together and your outter barrel/receiver are steady together, then it's just when it's all together something's not lining up. Try placing a barrel spacer near centre and one just inside from the end (within 2-4").

A good nozzle will help out immensely, especially paired with a good hop. If your cylinder is getting a good seal and holding properly, then it is what it is and you may wish to spend that money later. However a properly machined cylinder set isn't only stronger, it's steadier.

My last sniper project was a Tokyo Marui L96 and I upgraded nearly everything I could on it, save for the PDI receiver and hop. Looking back I probably should have tried another hop as the stock one left a bit to be desired. In the end, even with all the upgrades I deemed it unfieldable and sold it. To be fair, my expectations are pretty high. What I should have done was ship it off to someone like Thunder to dick around with the hop for me. I'm going to be building a VSR G-Spec build this time and focusing first on the hop and then working backwards.

September 14th, 2016, 10:40	#9
Ricochet How much sand CAN you fit in your vagina!? Trader rating Join Date: Feb 2008 Location: North Delta, BC (Greater Vancouver)	If your hop/inner barrel assembly are steady together and your outter barrel/receiver are steady together, then it's just when it's all together something's not lining up. Try placing a barrel spacer near centre and one just inside from the end (within 2-4"). A good nozzle will help out immensely, especially paired with a good hop. If your cylinder is getting a good seal and holding properly, then it is what it is and you may wish to spend that money later. However a properly machined cylinder set isn't only stronger, it's steadier. My last sniper project was a Tokyo Marui L96 and I upgraded nearly everything I could on it, save for the PDI receiver and hop. Looking back I probably should have tried another hop as the stock one left a bit to be desired. In the end, even with all the upgrades I deemed it unfieldable and sold it. To be fair, my expectations are pretty high. What I should have done was ship it off to someone like Thunder to dick around with the hop for me. I'm going to be building a VSR G-Spec build this time and focusing first on the hop and then working backwards. __________________ I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...