Airsoft Canada - View Single Post

ao_tenshi · August 23rd, 2016, 16:10

hey guys, based on the comments received, I've tested the issue over and over and can now verify that its the nozzle causing the feeding issue:

with a bright light looking down the hopup chamber entry, i noticed the head of the nozzle is about 1mm protruding into the path of the entering BBs.

Im suspecting that the issue is with the SHS Tappet Plate, since the both the original VFC nozzle and Lonex nozzle are not feeding well.

August 23rd, 2016, 16:10	#10
ao_tenshi Trader rating Join Date: Apr 2011 Location: Toronto, Ontario	hey guys, based on the comments received, I've tested the issue over and over and can now verify that its the nozzle causing the feeding issue: with a bright light looking down the hopup chamber entry, i noticed the head of the nozzle is about 1mm protruding into the path of the entering BBs. Im suspecting that the issue is with the SHS Tappet Plate, since the both the original VFC nozzle and Lonex nozzle are not feeding well. Last edited by ao_tenshi; August 23rd, 2016 at 17:26..