Quote:
Originally Posted by BobbyDangerous
Hi ASC,
I have an issue. I have a G&G Sig 553 and one of the screws that hold on the selector switch will not loosen. I have a nice set of Allan keys and everything and the screw is just stuck and is starting to strip. I tried hearing it up with my soldering iron to see if it would help loosen the loctite. But nothing. The only thing I can think of is if there is a small screw extractor. Any help would be appreciated..
Thanx
|
If it's one of those retarded allen screws that go straight into the selector switch your best luck is to use a a ball-end allen key that is slightly larger. By slightly larger i'm not saying the next metric size but the next imperial since it's stripped it might do some good to use the next largest size available and press hard to try to get it out.
Chances are you were using the wrong unit of measurement either metric or imperial and fucked up the screw. If there is even a LITTLE play with your allen key, STOP, and pull it out. Pull it straight out because the mongaloids who made these screws decided to make them out of fucking play-doh which may as well have been dog shit since they strip super easily even from just trying to take out your allen key.