|
I don't think you understand how these things work. Triggerboards are not interchangable. They are unique to the mosfet because on those units, they are computer controlled and have specific programming to use those switches. If you want to put a microswitch in, then you either need to start with a gearbox that uses a microswitch like an ares gearbox, or you buy the components yourself and attempt to customize your own system.
The btc board you have pictured also replaces the cutoff lever, so the btc unit has programming to interpret those signals.
A mosfet is not a computer.
A computerized mosfet has a micro processor and custom programming coded for features unique to the hardware installed on the unit, aside from a mosfet.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
|