Quote:
Originally Posted by AnthonyG
Today I opened up my gear box, cleaned it out and re-shimmed my sector gear a bit tighter (it was loose before). I also changed the stock air nozzle with an aluminum SHS one, and put a new O-ring on the piston head.
|
there's your problem. shs nozzle is too long.
Also, gears are not supposed to be tight. They are supposed to have a certain amount of play on the axle.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
|