Airsoft Canada - View Single Post - High Performance AEG Power Efficiency Survey

pestobanana · January 14th, 2015, 23:13

Reserved post to compile entries:

pesto:

#1

-Performance specs
Amp draw: 39
RPS: 60
FPS: 330

-Drivetrain specs
Battery: Turnigy Bolt 3S 2800mAh 65-130C Li-Po
Spring: Lonex M100
Gearing: Siegetek 10:1 SSG, short stroke -4
Motor: Tienly 45k, brushes replaced
Bearing use: Modify ceramic 8mm, steel bushing under spur
FET/wiring: BTC Spectre, 16 AWG
Motor tabs or direct solder: Gold plated tabs

#2

-Performance specs
Amp draw: 23
RPS: 45
FPS: 425

-Drivetrain specs
Battery: Turnigy Bolt 3S 2800mAh 65-130C Li-Po
Spring: SHS M110
Gearing: Siegetek 10:1
Motor: Tienly Infinity U-30000
Bearing use: Modify ceramic 8mm, steel bushing under spur
FET/wiring: BTC Spectre, 16 AWG
Motor tabs or direct solder: Gold plated tabs

hoodlum

#1

-Performance specs
Amp draw: 17 on auto, 21 on semi spam
RPS: 35
FPS: 389

-Drivetrain specs
Gearbox: Lonex v2 gb
Battery: nano tech 1.2a 25-50c 11.1v Li-Po
Spring: modify m120
Gearing: shs v4 12.1 short stroked 2 teeth
Motor: Shs high torque red cap, comm lathed and brushes rounded in water soak
Bearing use: Modify ceramic 8mm, steel oil tempered bushing under spur
FET/wiring: irls 3034, 16 AWG alpha wire
Motor tabs or direct solder: Gold plated tabs and deans wiring

January 14th, 2015, 23:13	#3
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	Reserved post to compile entries: pesto: #1 -Performance specs Amp draw: 39 RPS: 60 FPS: 330 -Drivetrain specs Battery: Turnigy Bolt 3S 2800mAh 65-130C Li-Po Spring: Lonex M100 Gearing: Siegetek 10:1 SSG, short stroke -4 Motor: Tienly 45k, brushes replaced Bearing use: Modify ceramic 8mm, steel bushing under spur FET/wiring: BTC Spectre, 16 AWG Motor tabs or direct solder: Gold plated tabs #2 -Performance specs Amp draw: 23 RPS: 45 FPS: 425 -Drivetrain specs Battery: Turnigy Bolt 3S 2800mAh 65-130C Li-Po Spring: SHS M110 Gearing: Siegetek 10:1 Motor: Tienly Infinity U-30000 Bearing use: Modify ceramic 8mm, steel bushing under spur FET/wiring: BTC Spectre, 16 AWG Motor tabs or direct solder: Gold plated tabs hoodlum #1 -Performance specs Amp draw: 17 on auto, 21 on semi spam RPS: 35 FPS: 389 -Drivetrain specs Gearbox: Lonex v2 gb Battery: nano tech 1.2a 25-50c 11.1v Li-Po Spring: modify m120 Gearing: shs v4 12.1 short stroked 2 teeth Motor: Shs high torque red cap, comm lathed and brushes rounded in water soak Bearing use: Modify ceramic 8mm, steel oil tempered bushing under spur FET/wiring: irls 3034, 16 AWG alpha wire Motor tabs or direct solder: Gold plated tabs and deans wiring Last edited by pestobanana; February 6th, 2015 at 23:46..