|
shoot the gearbox outside of the gun, that should remove any chance the wires are being pinched by the receiver. Monitor the temp that way.
IF you have a watt meter even better. a 120 setup should draw around 22-24 amps, though it will depend on the motor winding and magnet strength as well as your gearset ratio.
Which method did you use to shim your gears? Did you shim the pinion to bevel first or did you start from another method?
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
|