Airsoft Canada - View Single Post

Stealth · October 30th, 2013, 11:32

No. The receiver threads are not compatible. You'll need to rethread it to imperial as well as modify the thickness of the entire flange, depending on the barrel nut.

Beyond that, you may run into other issues with spacing of the rail from the upper, width of the upper, etc.

Not saying it's not POSSIBLE, but it can be done - I've done a few.

October 30th, 2013, 11:32	#2
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	No. The receiver threads are not compatible. You'll need to rethread it to imperial as well as modify the thickness of the entire flange, depending on the barrel nut. Beyond that, you may run into other issues with spacing of the rail from the upper, width of the upper, etc. Not saying it's not POSSIBLE, but it can be done - I've done a few. Last edited by Stealth; October 30th, 2013 at 16:56..