Quote:
Originally Posted by ShelledPants
I might replace the sears later to remove the nearly 1cm of deadspace in the trigger before it fires.
|
That trigger slack can be taken up by either swapping out to an adjustable trigger stirrup, or the super-cheap way is to add material to the front of the trigger stirrup. I've used tape as a shim in the past. Some people will glue a cut down BB there - whatever works best for you. Keep in mind, that with these cheaper methods, adjustment is a real pain in the ass, as you'll have to completely strip down the gun each time you need to make an adjustment. The adjustable stirrup is the easiest way.