Quote:
Originally Posted by N_Force
You have it for a while and keep using it, and working fine. Now it starts having problem, right?
|
Correct.
Quote:
Originally Posted by N_Force
I did a bit of the m14 research, let's start from the simple way, the lubrication first, then the internal parts check.
|
Quote:
Originally Posted by N_Force
On your video, the bolt got stuck after 4-5 shots in full auto, but you said it did not happen in semi, right?
|
Yeah, it's almost like in full auto its not getting enough gas sometimes to fully cycle the bolt (best guess?)
Quote:
Originally Posted by N_Force
What kind of gas you're using? If propane, did you add fair amount of bb oil?
|
If I'm shooting semi auto I will use Propane & give the adapter a good serving of oil for
EVERY mag
Quote:
Originally Posted by N_Force
It even sometimes got stuck and released entire mag gas. That could be the nozzle parts and the firing pin parts?
|
Hmmm I'll have to check but when I did take a quick look at them, they seemed to be in good condition.
Quote:
Originally Posted by N_Force
How long you have been having the m14?
|
How long have I had it? almost 2 years
How long have I had this issue? almost 3 weeks.
Quote:
Originally Posted by N_Force
When was your last lub for it?
|
It gets disassembled after
EVERY game to get a good cleaning & oiling.
Quote:
Originally Posted by N_Force
Where were the parts you lubed? If so , were they all the moving parts and contacted area even o-ring?
|
I go by the same rules for real-steel, if it moves it gets oil... there are a fair amount of parts so I'd rather not list them all
Quote:
Originally Posted by N_Force
What kind of oil and grease you were using? Think.....
|
For mag oil I use Tokyo Marui Silicone
For internal oil I use AIM TOP High Concentration Silicone