Quote:
Originally Posted by Nozomori
So would you recommend that I part out my current setup to sell and buy a PolarStar v2 Gen3 FE? I know how the FE works I just have no clue how a HPA setup works (regulator and tank etc.)
|
That's ultimately up to you, but I would suggest one. It is expensive, so is your build most likely (time vs money)
Realize how much it costs, the pro's/cons of lugging and using HPA and go from there.
You'll need a remote line with regulator/stabilizer and an HPA tank.
The line will run you ~$200-300.
You can get one from
http://palmer-pursuit.com/cart/air-s...8of9tle27t3db1. or you can contact Flagswipe paintball. Shawn built my rig, couldn't be more happier.
Perhaps contact your local PB shop and see if they can set you up. I went this route in case anything busts or I need wanted to tweak it one way or another, they're right by me.
The tanks can get expensive. I run a 62cu 3000 PSI tank, lasts for a good ~2000+ shots.
I have two just in case. They run for about ~$60 + shipping which wasn't horrible.
You can get a lot bigger and heavier, for more.
Here's my little write up on my P*:
http://ontarioairsoftwwiireenactors....pic.php?t=1747
Youtube was a huge deciding factor for me. I spent a week on there and a bit of Google before purchasing one.