Quote:
Originally Posted by Col.Angus
Ive got a socom gear 1911 (punisher custom). Its a great gun, and Ive only upgraded the inner barrel and hopup rubber.
The oonly thing is that occasionally it gets locked up when the hammer catches under the back of the slide as its returning.
Is there a way to fix this from happening?
|
Yep. Buy a Marui. LOL
But in all seriousness, I *think* you should be able to just swap in a Marui based hammer in to the gun, and that should solve your problem. In a number of WE/Socom Gear guns that I've messed with, the hammer hooks were cast too high, on the body, causing it to get in the way of the blowback unit. This would be the best way to solve the problem.
The next best, and even cheaper method, would be to file/machine a steeper and deeper ramp on the inside of the blowback unit, which would allow the slide to ride over the high hammer easier... OR, grind the corner of the hammer down.