Airsoft Canada - View Single Post - Is 7.4v 20c/3000mah reciver battery enough for Airsoft?

ScooterVauto · March 24th, 2013, 23:52

Just to make sure i dont burn my house down..
the pack in question has 2 red and 2 black.
the question is each "pack" is 2 x 3.7v lipos thus 4x 3.7
the packs are currently wired as 2x 7.4 (with 1 red and 1 black each)

when i wire it for use I'll want to basically combie the 2 red together
and the 2 blacks together which should give 7.4 @ 3000
correct?

if i wire them with 1 pack red to the other Black the outcome would be
14.8 @ 1500

now taht said it all depends on how the balancer is wired.
a 7.4 has 3 wires but a 14 has 5.

My charger uses the balancer to read the voltages and charges through the main power connector.

so I wonder if the balancer connector is going to be the crutch

March 24th, 2013, 23:52	#31
ScooterVauto Trader rating Join Date: Jun 2010 Location: Edmonton	Just to make sure i dont burn my house down.. the pack in question has 2 red and 2 black. the question is each "pack" is 2 x 3.7v lipos thus 4x 3.7 the packs are currently wired as 2x 7.4 (with 1 red and 1 black each) when i wire it for use I'll want to basically combie the 2 red together and the 2 blacks together which should give 7.4 @ 3000 correct? if i wire them with 1 pack red to the other Black the outcome would be 14.8 @ 1500 now taht said it all depends on how the balancer is wired. a 7.4 has 3 wires but a 14 has 5. My charger uses the balancer to read the voltages and charges through the main power connector. so I wonder if the balancer connector is going to be the crutch __________________ A single Light is all one needs to find their way through the darkness, But a single BB is all you need to bring it on! ========== Im not worried about the Bullet that has my Name on it, Im worried about the bullet that says "to whom it may concern" Lt. Alexander Washington -(Red Tails 1944) Ret.