|
Should have just posted here instead of sending PMs....
I recently am trying an upgrade to hiflow valves. I have a Action, Newer Nine ball Neo R, and a single KM high flow on hand. The gun shoots ~270 with 0.30 g with the stock valve, with any of the above three valves installed the velocity is also ~270 with .30.
Trying to narrow down the issue, I have a older 2+ years AS 150% hammer spring already installed it could be worn out. When i looked at the piston/loading nozzle I noticed wear on the piston orings and when shine a light into the loading nozzle their is light leaking out the from where the oring should be sealing against the nozzle.
Is the oring the issue or should i keep looking? Nozzle is 2+ years old AS
Next, When doing a detail tear down and clean the post that holds the hopup adjustment wheel tore free (sigh). Who makes the "best choice" replacement hopup chamber Nova, AIP
Nineball rubber vs A+ / Devil
__________________
Do you know what ruins airsoft?
(Chair), (Drama), (Air), (Sugar) softers, filthy casuals
---
Quote:
Originally Posted by mcguyver
it would appear I am not first up in this gang-bang
|
---
WANTED PTW Receiver PRIME, STG, Factory
|